User manual MGA ENTERTAINMENT BRATZ DIGITAL CAMERA WEBCAM 6 7

[. . . ] You should exercise extreme caution or discontinue use in potentially hazardous situations. Hearing experts advise against continuous, loud and extended play. If you experience a ringing in your ears, reduce volume or discontinue use. This will allow you to hear outside sounds and to be considerate to people around you. [. . . ] This will allow you to hear outside sounds and to be considerate to people around you. If there is lightning when you are using the unit, take off the headphones immediately. This product is designed to be splash-resistant, but should not be immersed in water or come in continuous contact with water. ⷠBefore installing the batteries, be sure to wipe off drops of water on the unit. ⷠThe supplied headphones are not meant to be immersed in water or come in continuous contact with water, if they get wet, dry them with a soft cloth. Never use an electric hair dryer while wearing the headphones. If you have any questions or problems concerning your unit, please consult your nearest Sony dealer. It will give you many hours of reliable service and listening pleasure. Before operating the radio, please read these instructions thoroughly and retain them for future reference. Install two R03 (size AAA) batteries (not supplied) with correct polarity. The clock system of this unit varies depending on the model you own. To set the current time rapidly, keep pressing TUNE/TIME SET + or ­ while holding down ENTER/CLOCK. Connector Connecteur Conector Aansluiting Connettore The channel step of this unit is factory-set to 9kHz or 10 kHz to match the frequency allocation system of the country as listed. To change the preset station, set a new station's frequency in the number whose station you want to change. Change the AM channel step when the radio is turned off. While holding down ENTER/CLOCK, keep pressing POWER for more than 5 seconds. If you proceed step 2 again, the channel step changes again. When the AM channel step is changed, the preset stations will be erased, the clock setting will be cleared and "0:00" or "AM 12:00" flashes in the display. Hold both edges of the connector and slide the connector onto the unit until you hear a click Unwind and straighten the wraparound band. to more easily straighten the band , slightly bend the tip of the band in the opposite direction. [. . . ] Hold both edges of the connector and slide the connector onto the unit until you hear a click Unwind and straighten the wraparound band. to more easily straighten the band , slightly bend the tip of the band in the opposite direction. Hold the body of the unit and attach the straightened band to your arm. Each press changes the band FM/AM alternately. [. . . ]