User manual MGA ENTERTAINMENT TEXAS HOLD EM 2

[. . . ] http://www. sony. net/ © 2006 Sony Corporation 2-689-529-11(1) Trademarks · Corporation. · "Memory Stick", is trademarks of Sony , "Memory Stick PRO", , "Memory Stick Duo", , "Memory Stick PRO , "MagicGate", are trademarks of Sony WARNING To reduce fire or shock hazard, do not expose the unit to rain or moisture. · · · · Duo", and Corporation. Microsoft, Windows and DirectX are either registered trademarks or trademarks of Microsoft Corporation in the United States and/ or other countries. Macintosh and Mac OS are trademarks or registered trademarks of Apple Computer, Inc. [. . . ] · Do not press against the LCD screen. The screen may be discolored and that may cause a malfunction. · Images may trail across on the LCD screen in a cold location. · This camera is equipped with a power zoom lens. Be careful not to bump the lens, and be careful not to apply force to it. On cleaning Cleaning the LCD screen Wipe the screen surface with an LCD cleaning kit (not supplied) to remove fingerprints, dust, etc. Cleaning the lens Wipe the lens with a soft cloth to remove fingerprints, dust, etc. Cleaning the camera surface Clean the camera surface with a soft cloth slightly moistened with water, then wipe the surface with a dry cloth. Do not use the following as they may damage the finish or the casing. · Chemical products such as thinner, benzine, alcohol, disposable cloths, insect repellent, sunscreen or insecticide, etc. · Do not touch the camera with the above on your hand. This rechargeable battery is continually charged as long as you are using the camera. · If the camera is running on battery power and you do not operate the camera about three minutes, the camera turns off automatically to prevent battery drain (Auto power-off function). Set/Change the date and time First, enter the (Setup) menu to select [Clock Set]. 1 Press MENU (B) to display the menu. 2 After pressing B on the control button (C), go to the setting, then press B again. 3 Select 2 (Setup) (Setup2) with V, then press B. 4 Select [Clock Set] with V, then press B. 5 Select [OK] with v, then press z. 13 Now you can adjust the date and time. 1 Select the desired date display format with v/V, then press z. 2 Select each item with b/B and set the numeric value with v/V, then press z. · To cancel, select [Cancel] and press z. 1 Clock Set Y/M/D M/D/Y D/M/Y 2 Clock Set Y/M/D M/D/Y D/M/Y 3 Clock Set Y/M/D M/D/Y D/M/Y 2006 / 1 / 1 12 : 00 OK AM Cancel 2006 / 1 / 1 12 : 00 OK AM Cancel 2006 / 1 / 1 10 : 30 OK AM Cancel To turn off the Press MENU. (Setup) menu screen Change the language setting Open the (Setup) screen after performing step 1 and 2 in "Set/Change the date and time. " Select [Language] in (Setup1), then choose your desired language. 1 Select the image size for still images The factory setting for image size is [6M]. This setting requires more memory capacity, which reduces the number of images you can take. Set the image size according to purpose. 1 Press (Image Size) (D). 2 Select the size with v/V (C). 3 Press Image size (Image Size) to complete the setting. Guidelines No. of images Printing 6M (2816 × 2112) (the default setting) 3:2 (2816 × 1872)* 3M (2048 × 1536) 2M (1632 × 1224) VGA (E-Mail) (640 × 480) For printing in A4 size or high density images in A5 size Less Fine For printing in postcard size For recording a larger number of images For attaching images to e-mail or creating web pages More Rough * Images are recorded in the same 3:2 aspect ratio as photograph printer paper or postcards, etc. · Recordable number of still images vary depending on the image size selected. 14 Shoot images easily (Auto adjustment mode) A B Hold the camera Shoot images easily (Auto adjustment mode) Position the subject in the center of the focus frame Hints for preventing blur Hold the camera steadily, keeping your arms at your side. [. . . ] If it is full, do one of the following: ­ Delete unnecessary images. ­ Change the "Memory Stick Duo". · You are using the "Memory Stick Duo" with the write-protect switch, and the switch is set to the LOCK position. Set the switch to the recording position. The image is out of focus. · The subject is too close. [. . . ]