User manual MICROTEK ADF-700

[. . . ] Microtek bears no responsibility for the unauthorized use of copyrighted materials. 1. To do so, open the lid until it stands vertically, then pull upward to remove. Copyright©2004 Microtek International, Inc. I49-003761A, July 2004 http://www. microtek. com 2. Carefully align and insert the feeder studs into the hinge slots originally used by the scanner cover. 3. [. . . ] Once the paper-scanning mechanism is established and verified, you can then proceed to use the ADF-700 extensively and with assurance. To do the preview, follow the steps below: 1. Load a piece of paper from the paper stack into the ADF's Document Feed Tray. Click the Preview button to perform a preliminary view of the entire image. When done, a preview image appears in the preview window. At this moment, the previewed page is delivered to the document tray from the ADF's Document Feed Tray. Load the previewed page, along with the paper stack, on the ADF's Document Feed Tray. You are now ready to scan. 4 Microtek ADF-700 Installing and Getting Started Scanning for OCR 1. Place the documents to be scanned on the Document Feed Tray. Launch ScanWizard 5 in stand-alone mode or from your image-editing software. In the ScanWizard 5 Standard Control Panel, specify the following settings: a) Click the Original button, then select Text Document as your scan material type. b) Click the Scan Type button, then select Black & White as your output image type. c) Click the Purpose button, then select OCR Text. Note: When scanning colored text originals, you must select "Photo" and use either True Color/Web Color (unless B/W is the chosen output). When the options menu appears, select OCR. When the OCR: Save As dialog box appears, use the default "Document" file name, or key in your preferred file name and select the export file format (. rtf, . txt, . htm, . xls, or . pdf ) . Selecting this check box will create files under the specified file name, and numbers are added serially and in order to generate multiple file names for the scanned/saved documents. For example, assuming the document is saved as "Sample, " the first document will be Sample. 001, followed by Sample. 002, Sample. 003, etc. Microtek ADF-700 Installing and Getting Started 5 6. The default language for OCR is English. To change the language, select your preferred language from the OCR Language options menu. Click Save to start OCR scanning from the top sheet. The scanned document will be saved to your chosen folder. · If the check box "Send document to application after saving" is enabled, the saved file is automatically opened to your designated application for further editing. · If the check box "Save multiple pages as a single file" is enabled, all pages of the originals are scanned before they are saved under a single file name. [. . . ] A6 (105 mm x 148 mm) (4. 14" x 5. 83") Max. Legal (21. 59 cm x 35. 56 cm) (8. 5" x 14") Accuracy Paper skew: ±1º Paper length: ±1% 1 failure per 500 pages (Failure occurs in the form of no feeds, multiple feeds, or paper jam) Connector 15-pin subminiature D-shell Physical Dimensions: 21. 14" x 11. 61" (537 mm x 295 mm) Input tray height: 3. 14" (80 mm) Weight 5. 73 lb. (2. 6 kg) Power Consumption 6. 5 W (max. ) Operating 50ºF to 95ºF (10ºC to 35ºC) Environment 10% to 85% relative humidity Capacity Paper Basis Weight Paper Size 10 Microtek ADF-700 Installing and Getting Started Addendum: Checking Your Firmware Version You can check the firmware version of your scanner through the ScanWizard 5 scanning software. This can be done with either the Standard Control Panel or the Advanced Control Panel. [. . . ]