User manual MICROTEK ARTIXSCAN DI 2010 Reference Guide

[. . . ] © 2004 by Microtek International, Inc. MicrotekTM and ScanWizardTM are trademarks of Microtek International, Inc. Windows ® is a registered trademark of Microsoft Corporation. All other products or name brands are trademarks of their respective holders. [. . . ] Only the view size of the preview image is changed; the actual output size of the image remains the same. The reduction levels decrease from 400%, 300%, 200%, to 100%. Create Subframe tool The Create Subframe tool lets you create a new frame within the main frame. This feature allows you to create as many frames as you wish, and each frame can then have its own settings. With the creation of a new frame, the new frame becomes the current selected frame. When a new frame is created, it is best to specify different image types that differentiate the main frame from the subframe. For example, when the main frame image type is Photo, it is recommended that you set the subframe image type to Text or Line Art. To use the Create Subframe tool button, 1. Click the Preview button to see a preliminary view of the image. Click the Create Subframe tool button; the cursor becomes a plus (+) symbol. At this time you can draw a new frame in the scan frame. When a new frame is generated, you will see that the new added frame is selected and enclosed in red dotted lines. Specify the frame settings for the new added frame. Delete Subframe tool The Delete Subframe tool lets you remove a subframe that you previously created. To use the Delete Subframe tool button: 1. Select the subframe to be removed in the preview window or in the Frame Information window. The subframe you selected is deleted. Main frame Two added subframes 15 Scan Source Allows you to select the image input device. Three options for choosing the image device are available (depending on the scanner model): "Flatbed"; "Flatbed" and "ADF (Simplex)"; ADF (Simplex) and ADF (Duplex)". If the ADF (Automatic Document Feeder) is not installed, "Flatbed" is the sole selection. Scan Type Allows you to select the image type for the scan when it is output. Select from RGB Color (24 bits), Grayscale (8 bits), and Black & White (1 bit). By default, the Scan Type is "Black & White (1 bit)". The RGB Color (24bits) option is not available for some scanner models (i. e. , ArtixScan DI 6020). Paper Size Allows you to select the dimension of your preview image size and the paper size of your original. [. . . ] You can enable this option if the output page file format is RTF, TXT, or PDF. When enabled, ScanWizard DI will prompt you to place the next page as you scan from the scanner bed, then click the Continue button to scan; or click the Close button to save multiple pages as a single file. If you scan through the ADF, originals are sequentially scanned until paper out; when finished, all the scanned pages are saved as a single file. Send document to application after saving: If this option is checked, the scanned images are sent to your selected application. [. . . ]