User manual MICROTEK GNC M C786 XXXX

[. . . ] u Consult your local dealer or an qualified technician. FCC Warning: To assure a continued FCC compliance, a user must use a grounded power supply cord and the provided shielded video interface cable with bonded ferrite cores. Also, any unauthorized changes or modifications to this monitor will void the user's authority to operate this device. Note: If necessary, shielded interface cables and the A. C. power cord must be used to meet the emission level limits. EMI Certification The Class B digital apparatus meets all requirements of the Canadian InterferenceCausing Equipment Regulation. [. . . ] Always call your service center or a qualified technician to fix it. 2 First Step This User's manual contains graphics and information that is for reference purposes only and is subject to change without notice. Introduction Congratulations for purchasing this high-performance 17-inch color TFT LCD monitor. This monitor provides flicker-free and color images at optimal resolutions. Through this user guide, we will introduce to you all the features, functions, and technical specifications of this LCD monitor. Features This monitor is an intelligent, microprocessor-based, and ergonomically designed display compatible with most analog RGB (Red, Green, Blue) display standards, including PS/V, PS/2, optional for Apple Macintosh Centris, Quadra, and Macintosh II family signals. The LCD monitor is capable of displaying crisp and vibrant color graphics with VGA, SVGA, XGA, SXGA (non-interlaced), and most Macintosh-compatible color video cards. ·The monitor is able to properly function even in case of upgraded video cards or software because of the wide auto-scanning compatibility range. ·The internal microprocessor digitally controls auto-scanning for horizontal scan frequencies between 31. 5 KHz and 91. 1 KHz, and for vertical scan frequencies between 56. 3 Hz and 85. 0 Hz. In each frequency mode, the microprocessor-based circuitry allows the monitor to function at the precision of a fixed frequency. ·The resident memory allows for storing factory default settings and additional user-adjusted parameters. ·The maximum resolution achievable is SXGA (1280 x 1024), best suited for Win dows applications. ·The compact and sleek cabinet design saves desk space and makes your desk look neat and tidy. ·The monitor is compliant with VESA-DPMS power management standards. In order to save energy, the monitor must be connected to a system compliant with the standard. 3 This monitor package comes with: l LCD Monitor l Video cable l AC Power cord l AC to DC Adapter l Audio cable l User's manual l Floppy Disk (for test pattern and set up) 4 Quick Installation To install the monitor on your host system, please follow the steps below: Steps 1. Make sure that both the monitor and computer are powered OFF. Connect the video cable to the computer first, then to the monitor. Connect the power cord to the monitor through the AC/DC adapter, then to a properly grounded AC outlet. Audio-Out connects to the speakers on the base. Power ON the monitor first, then power ON the computer. If the monitor still does not function properly, please refer to the troubleshooting section to diagnose the problem. 5 Screen Position Adjustment In order to optimize the best viewing position, you can adjust the tilt of the monitor by using both of your hands to hold the edges of the monitor as shown in the figure below. The monitor can be adjusted to 30 degrees up or 5 degrees down as indicated by the arrow below. 6 Front Panel Control AUTO MENU 1. Power LED: Lights up to indicate that power is turned ON. [. . . ] The monitor supports DDC1 and DDC2B standards. 13 Troubleshooting Before sending your LCD monitor for servicing, please check the troubleshooting list below to see if you can self-diagnose the problem. Problems No Picture Current Status LEDON LEDOFF Remedy Using OSD, adjust brightness and contrast to maximum or reset to their default ettings. LED displays amber color Check the power switch. Check if AC power cord is properly connected to the AC adapter Check if video signal cable is properly connected at the back of monitor. Check if specifications for the graphics adapter and monitor are in compliance, which may be causing a mismatch in input signal frequenay. [. . . ]