User manual MICROTEK GNC M JTXV9S XXXX

[. . . ] FCC Compliance Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. this device may not cause harmful interference, and 2. this device must accept any interference received, including interference that may cause undesired operation. [. . . ] in Brightness), you can also use this button to decrease values. 8 5. Power Switch This button lets you turn power for the LCD monitor ON or OFF. This is also a "hot key" to close the OSD menu while it is on display. Adjusting the Monitor's Display OSD Main Menu To access the OSD main menu, press the OSD Menu button. Use the Function Select buttons to scroll through the various OSD controls. The highlighted OSD control is the one that is currently selected. A. Analog mode: Each main menu and submenu item is covered below. Pressing the OSD Menu button causes the following screen to appear (an example): Figure 2-2: The OSD Main Menu 9 Monitor-Control Option The Monitor-Control option allows you to adjust the LCD monitor's display characteristics. AUTO-ADJUST : Applies automatic monitor settings for optimal viewing. H-POSITION: Moves the LCD monitor's display left or right on a horizontal plane. V- POSITION: Moves the LCD monitor's display up or down on a vertical plane. PHASE: Adjusts the focus and clarity of the display. CLOCK: Adjusts the display's pixel alignment. RESET: Resets the H- Position, V-Position, Phase and Clock parameters. GRAPH. /TEXT: Switches between the text and graphic options. PORT-SELECT: Changes input between VGA port and DVI digital port. EXIT: Exits the Monitor-Control submenu. OSD-Control Option The OSD-Control option lets you adjust the position of the OSD on the screen. OSD-H-POSITION: Changes the position of the OSD on a horizontal plane. OSD-V- POSITION: Changes the position of the OSD on a vertical plane. 10 OSD-TIMER : Changes the OSD display time. EXIT: Exits the OSD-Control submenu. Graphic-Control Option The Graphic-Control option lets you adjust the contrast, brightness and color of the LCD monitor's display. CONTRAST: Adjusts the difference between the lightest and darkest areas of the LCD monitor's display screen. BRIGHTNESS: Adjusts the level of light or brightness on the LCD monitor's display screen. Brightness should be adjusted together with Contrast. COLOR: Selects the LCD monitor's color display. [. . . ] In Windows, load a wallpaper bitmap that has vertical lines in it (or select the Windows shut-down screen) After you have the wallpaper loaded, open the OSD and select the "Clock" function. Press the top (or bottom) Adjustment Control button and continue pressing the button until you see vertical dark and light lines across the screen. When you can see distinct light and dark vertical bands, stop pressing the Adjustment Control button. Now press the opposite (top or bottom) Adjustment Control button. [. . . ]