User manual MICROTEK GNC M SW5MSC 0803

[. . . ] Welcome! The latest Microtek scanners are equipped with smart-buttons for easier access to scanner functions. Scanners with the smart-buttons have these configurations: q 3 one-touch buttons: Scan, Copy, and E-mail. 5 one-touch buttons: Scan, Copy, E-mail, OCR, and Scan-to-Web or Scan, Copy, E-mail, Setup, and Cancel. 7 one-touch buttons: Cancel/Setup, Scan, Copy, E-mail, OCR, Scanto-Web, and Custom. q q Microtek scanners assist users by simplifying scanning tasks and increasing productivity with just the touch of a button. [. . . ] The scanned images will be automatically identified as "Image001. jpg", "Image002. You can change the default root file name to uniquely label your scan jobs. File Format: JPEG is the file format available -- as this is the standard image format widely used on the web. OK button Confirms and saves the parameters currently specified for the Scan-to-Web Smart-Touch button on your scanner. The next time you press the Scan-to-Web button, the defined and saved settings are retrieved as your current settings. Cancel button Abandons the parameters you have just made under the To Web tab panels; all the parameters are restored to their previous settings. Reset button Clears all the parameters you have just made under the To Web tab panel; all the parameters are reset to their default settings. Help (?) button Provides answers to any queries regarding the MSC utility and scanner button functions. Simply click the Help (?) button located at the bottom right (bottom left for Mac) corner of the MSC panel. To search for a topic, click the Index tab, then type a word associated with your question. You will be prompted for a short definition that will link you to a file:///D|/msc/WebHelp/panel_To_Web. htm (4 of 5) [8/20/03 2:29:53 AM] related topic. file:///D|/msc/WebHelp/panel_To_Web. htm (5 of 5) [8/20/03 2:29:53 AM] Customizing the Custom panel The Custom panel provides 4 custom functions (Power Saving, Scan, Fax, Launch Application) allowing you to specify the Custom button function on the scanner. The Power Saving page is the default page of Custom panel. For more details on each function, see the function page you wish to view from the links below. Power Saving Scan Fax Launch Application file:///D|/msc/WebHelp/panel_custom. htm [8/20/03 2:30:13 AM] Power Saving page Select "Power Saving" from the Custom Function option menu. The Power Saving function allows you to select the sleep mode of the scanning lamp by pressing the Custom button on your scanner. Windows Macintosh Lamp Status For Windows: When you select the Power Saving function as your scanner's Custom button function, press the Custom button for the scanner and the TMA to switch over to "lamp sleep" mode. The scanner lamp or TMA lamp (e. g. , Light Plate, TMA, LL35) can then be turned Off or On, or both Off. The Lamp Status reflects the current power saving mode. For Macintosh: When you select the Power Saving function as your scanner's Custom button function, press the Custom button on the scanner to switch the scanner to the sleep mode (scanning lamp turned off), or ready for scanning (scanning lamp turned on). Note: When the lamp status is "Off, " performing a scan will change the lamp status to "On. " OK button Confirms and saves the parameters currently specified for the Custom file:///D|/msc/WebHelp/Custom_Power_Saving_page. htm (1 of 2) [8/20/03 2:30:55 AM] Smart-Touch button on your scanner. The next time you press the Custom button, the defined and saved settings are retrieved as your current settings. Cancel button Abandons the parameters you have just made under the Custom tab panels; all the parameters are restored to their previous settings. Reset button Clears all the parameters you have just made under the Custom tab panel; all the parameters are reset to their default settings. [. . . ] To customize the parameters for the Custom button - Launch Application function, specify your "Launch Application" function settings under "Custom" in the MSC utility. file:///D|/msc/WebHelp/b_Custom. htm (2 of 2) [8/20/03 2:44:21 AM] How to setup MAPI application as your system default Email (for Windows only) Setting Microsoft Outlook Express 1. When the Options dialog box appears, click the General tab. From the General tab, select the check boxes: Make Outlook Express my default e-mail program and Make Outlook Express my default Simple MAPI, then click Apply and OK to save the settings made. Setting Microsoft Outlook 97 1. Microsoft Outlook 97 doesn't have the option for setting MAPI application. [. . . ]