User manual MICROTEK GNC SPL SMI900 1104

[. . . ] Supplement Getting to Know Your ScanMaker i900 The ScanMaker i900 is a dual media flatbed with 6400 x 3200 dpi resolution, 4. 2 maximum optical density, 8. 5" x 14" legal-size scan bed for the upper bed, and 8"x10" lower bay for scanning transparencies. The scanner features the PictuRescueTM system with DIGITAL ICETM Photo Print Technology to reconstruct damaged photos, plus ColoRescueTM one-touch color restoration for both photos and film. Also featured is the Microtek-patented Emulsion Direct Imaging TechnologyTM (E. D. I. T. TM) for producing clear, distortion-free images in transparency scanning. Scanning Regular, Non-Damaged Photos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Scanning Damaged Photos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Specify your scanning requirements in the Settings window. c) Adjust the scan frame settings if necessary. Adjust image quality if necessary, using the Advanced Image Correction (AIC) tools. Click the Scan button in the Preview window to start scanning. The Scan button appears as the "Batch" button when ScanWizard Pro is started in standalone mode. · · If ScanWizard was launched from an application program, the image is then delivered to your application, where the image can be saved, printed, or edited. If ScanWizard was launched in standalone mode, you will be prompted to specify the file attributes for the scanned image after the button is pressed, such as entering the file name, specifying a folder name of your own, etc. When you have completed the settings, press the Done/Save button, and the scanner will automatically scan and save your image based on your settings. Click the Folder icon to specify a folder or file name of your own. ScanMaker i900 Supplement 19 20 ScanMaker i900 Supplement Scanning Damaged Photos 1. Raise the scanner lid, and place the damaged photo to be scanned face down on the scanner glass bed, towards the front of the scanner. Center the top of the photo along the horizontal ruler on the scanner. Place photo here for photo restoration Direction of carriage moving Note: If the creases lie in the same direction where the carriage is moving, the creases may not be detected by the scanner. To fix this problem, position your photo slightly skewed (min. 45°), so that none of the creases are parallel to the direction of the moving carriage. Go to the Preview window and choose Reflective from the Scan Material menu. 4. Optional: If calibration has been performed, go to the Settings window in ScanWizard Pro. Choose the profile you have just created in the Input Profile / Scanner Profile menu. ScanMaker i900 Supplement 21 5. Click the Overview button to perform a preliminary scan of the image, which will appear in the Preview window. Select the Scan Frame tool from the Toolbar in the Preview window, and choose the area to be scanned by dragging a rectangle around it. You will see a flashing frame (marquee) around the selected area. Specify your scanning requirements in the Settings window. Recommended resolution for DIGITAL ICE is 800 dpi; maximum is 3200 dpi. c) Adjust the scan frame settings if necessary. Adjust image quality if necessary, using the Advanced Image Correction (AIC) tools. [. . . ] At the end of the profiling process, a dialog box appears, prompting you to enter a profile name and description. Aligning the Registration Marks A. Bottom-right registration mark Move the cursor to the target image area; the pointer will change to a horizontally flipped L mark (" "). Align the cursor with the small upperleft registration mark. After the upper left mark is aligned, the upper right part of the target image is displayed, and an instruction dialog box prompts you to align the upper right registration mark. Move the cursor to the target image area; the pointer will change to a normal L mark (" "). [. . . ]