User manual MICROTEK LIGHTLID EL

[. . . ] Microtek LightLid Series Products InstallationandScanningGuide & Win For Ma d cin ows to sh This document provides information on how to connect the LightLid to your scanner and how to scan transparent materials with it. Installation 1. Unpack LightLid The LightLid is a scanner accessory that is used to scan transparent materials with your flatbed scanner. [. . . ] The clear opening strip should point toward the front of the scanner. Deutsch Clear opening strip Français Nederlands Italiano Accessory Port 6. Peel off the protective vinyl film Peel off the protective vinyl film from the back of the template. Español 8. Press the template against the glass surface Press the template all the way around against the scanner glass bed. This ensures that the template adheres securely to the glass. The protective vinyl film covers the template during shipping and prevents it from being scratched. When peeling the vinyl film from the template, be careful not to tear off or bend the template. Template should fit snugly within the scanner glass surface and not overlap on the vertical/horizontal rulers. 2 Close-up view 3 Español Nederlands Make sure the film being scanned does not in any way block, obstruct, or overlap the clear opening strip of the template. R Italiano Français Deutsch Place the transparent material to be scanned, face down on the scanner glass surface, inside the template. English 9. Position the material to be scanned To scan transparent or negative film, the template should always stay on the scanning bed. If the template is removed or incorrectly placed, the scanner will not work properly. The clear opening strip of the template is the color calibration area, and this area must be kept clear from any obstructing or overlapping material, such a the film being scanned. Covering this calibration area may adversely affect the quality of your scanned images and also cause the scanner to malfunction. Warning: R English 10. Power up your scanner and then the computer. Press the scanner's "Go" button, or double-click the ScanWizard 5 icon on the desktop to launch ScanWizard 5. When ScanWizard 5 launches, it automatically performs a fast preview of the material on your scan bed and displays it in the preview area. [. . . ] The image is then scanned and saved to a file. Aside from saving, you may also deliver the saved image to an image-editing software, an e-mail editor, or a web browser. Italiano To save the scanned image to a file, or deliver it to an image-editing program, an e-mail editor, or a web browser. To switch to the Advanced Control Panel window To exit ScanWizard 5 To specify image settings 4 [. . . ]