User manual MICROTEK PC I INSTALLV6USLSCSI 0199

[. . . ] Note: Before performing the next step, you must have an Adaptec SCSI card already installed in your computer and working properly. If you need help in setting up the Adaptec card in your computer, please call the Adaptec technical support number found in your Adaptec SCSI card manual. Microtek will not be able to provide help on installing your interface card. Connect the SCSI cable from one of the scanner's SCSI ports to the SCSI interface card on the back of your computer. [. . . ] In Windows, go to "Start, Programs, Microtek ScanWizard', and select Scanner Test. When started successfully, the screen below appears. Click the Flatbed button. e) Adobe Acrobat Reader. This is your documentation reader for reading and printing the manuals on the CD-ROM. After all the software has been installed, click Exit at the bottom left of the Microtek Software Installer screen. Insert the Adobe Photoshop LE CD-ROM into your CD-ROM drive. Double-click the following in successive order: "My Computer" in your Windows desktop, the "Photosle" CD-ROM icon, the folder named "English", the folder called "Photosle", the folder called "Disk 1", and finally the "Setup. exe" icon to start installation. Follow the on-screen instructions until Photoshop LE is installed. Restart your computer at the end of all software installation. Detected scanner Detected Interface Click the "Flatbed" button 6. 4. Place your document face down on the scanner glass, and click OK in the dialog box. Top of document faces front of the scanner. 7. A 6. A preview of your image will be displayed in the Microtek ScanTest window. Click OK, and exit Microtek ScanTest; you are now ready to scan. 4 S S I s al to o t eP C I n t la i n n h C 4. Go to "Start, Programs, Adobe Photoshop 4. 0 LE", then choose Adobe Photoshop 4. 01 LE. When the program starts, go to the "File" menu, choose Import, then choose Select Twain_32 Source from the submenu. When a dialog box comes up, select the option Microtek ScanWizard (32bit), then click Select. Go back to the "File" menu, choose the Import command again, and this time choose Twain_32 from the submenu. This will launch the Microtek ScanWizard program, and you will see the "Preview" and "Settings" (Untitled Job1) windows. Place the image to be scanned on your scanner, then click the Preview button. When the preview image appears, you can resize the floating dotted line around the image to determine the final size of the actual scan. To scan the image, confirm the settings in the "Settings" (Untitled Job1) window, then click the Scan button. The image is then scanned and delivered to Adobe Photoshop LE, where the image can be edited further or saved as a file. To see the image in Adobe Photoshop LE, exit ScanWizard by clicking the"X" on the top right corner of the Preview window. Preview button 5. [. . . ] This is your OCR text-scanning software. This is your documentation reader for reading and printing the manuals on the CD-ROM. To install each software, open the software program's folder and then click the "Installer" icon in that program's folder. Follow the onscreen instructions until installation is completed. 3. 7 SCSI Installation on the Macintosh 4. [. . . ]