User manual MIDLAND 75-822

[. . . ] Insert batteries, paying special attention to polarity. If they are placed in the compartment backwards, the unit will not work. Snap the two sides of the compartment back together. Turn unit on and begin use. http://www. midlandradio. com -5- Quick Start- (Portable Mode) 1. [. . . ] Antenna Connector Attach the antenna provided for portable use 2. Squelch Control ­Adjust the squelch until background noise disappears to 3. 8. receive the MAX sensitivity ON/OFF Knob ­ Used to turn your radio ON/OFF or to control volume. Channel UP/Down Button ­ To change channel or change mode from CB to weather channels. Backlight Button ­ Press to turn LCD backlight "On" or "Off" Last Channel ­ Press this button to recall the last channel used Push To Talk ­ Push this button and talk into speaker to communicate with other CB users Memory "M" Buttons - There are 5 memory buttons. Each is categorized with the letter M and a number next to it. Each button has a function. M1- Functions as memory channel 1 and emergency channel 9/19. To switch between functions, just press and release button. M2- Functions as memory channel 2 and programmable dual watch. Dual Watch is used to quickly switch between two channels that are far apart. To program the 2 dual watch channels, you must do the following. With the radio on: http://www. midlandradio. com -9- 1. 7) Press and hold the DW button until you hear a beep. Using the channel selector, select the second channel. Press and hold the DW button until you hear it beep again. On the LCD you will see the two channels that you have programmed flashing back and forth. M3-Functions as memory channel 3 and scan. To start scanning other channels. press the M3 button. To stop scanning, push the M3 button again. M4- Functions as memory channel 4 and the mode button. This button switches the radio between CB and weather radio mode. M5- Functions as memory channel 5 and the lock button. To lock the radio just press the button until it beeps. To unlock the radio repeat the same procedure 9. Dual Function "F" Button ­ The "F" button is used to program the memory channel for the M1-M5 buttons. To program a channel follow these steps: 1. [. . . ] This warranty does not apply to water damage, battery leak or abuse. This warranty does not include any carrying cases, earphones, or antennas, which may be a part of or included with the warranted product, or the cost of labor for removal or re-installation of the product in a vehicle or other mounting. Performance of any obligation under this warranty may be obtained by returning the warranted product, freight prepaid, along with proof of purchase to: Midland Radio Corporation Warranty Service Department 5900 Parretta Dr. Kansas City MO 64120 This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state. [. . . ]