User manual MIDLAND GXT325

[. . . ] It is a quality piece of electronic equipment, skillfully constructed with the finest components. The circuitry is all solid-state and mounted on a rugged printed circuit board. Your two-way radio is designed for reliable and trouble-free performance for years to come. [. . . ] Place the units into the desktop charger slot and note that the LED indicator with RED color will light up, indicating charging function. When the battery pack reached a substantial voltage level, the LED indicator will change to GREEN color . However, this does not ensure that the battery pack is fully charged so it is recommended that the battery pack be charged for at least 12 hours. Do not attempt to charge alkaline batteries or any batteries or battery packs other than the one indicated in the manual. This may cause leakage and damage to the radio. For long term storage of the radio, turn the radio OFF and remove the batteries from the radio. ! LOW BATTERY LEVEL INDICATOR Your GXT300/325/400/450 Series has a LOW BATTERY ICON which will only appear on the LCD display if the battery voltage level is low. At this point, the battery needs to be charged for at least 12hrs. Page 7 www. midlandradio. com Model GXT300/325/400/450 Series ® GXT300/325 SERIES QUICK REFERENCE CHART MENU Channel Privacy Power eVOX Roger Beep Call Tone Silent Operation 1~22 oF~38 H/L oF/1/2 On/Off 1~3 On/Off GXT400/450 SERIES QUICK REFERENCE CHART MENU Channel Privacy Power eVOX Vibrate Roger Beep Call Tone Silent Operation Press & hold Menu button 1~22 WX Channel oF~38 H/M/L oF/1/2 On/Off On/Off 1~5 On/Off 1~10 MONITOR Pressing and holding the MONITOR button for 1 second will let you hear noise so you can adjust the volume level of the radio when not receiving a signal. This should be used to check activity on your current channel before transmitting. Press and hold the MONITOR button for 1 second again to get out of MONITOR mode. SCAN Your GXT300/325/400/450 Series can scan all 22 channels for activity. To enter, quickly press the SCAN button. Your radio will rapidly scan each of the 22 channels and stop on any active channel for 5 seconds before resuming scan. When you press the PTT button to transmit on an active channel, the scanning function will stop and remain on the active channel. To resume scanning, quickly press the SCAN button. Page 9 www. midlandradio. com Model GXT300/325/400/450 Series ® !! SETTING PRIVACY CODES Your GXT300/325/400/450 Series has 38 Privacy codes available. The selected Privacy Code may be different for each channel. To select a Privacy Code for the current channel press the MENU button twice, and then the / buttons to select one of the 38 Privacy Codes. To confirm the selection, press the PTT button or press MENU button again to move to the next feature setting. [. . . ] Select "1" or "2" by pressing the / buttons and push the PTT key, or press MENU button again to move to the next feature setting. eVOX will be more sensitive on the "2" setting than on the "1" setting. To turn eVOX off, press the MENU button four times. [. . . ]