User manual MIELE CRYSTAL G 5105 SC

[. . . ] Operating Instructions Dishwasher G 5100 G 5105 To prevent accidents and appliance damage read these instructions before installation or use. en - US, CA M. -Nr. 09 016 310 Contents IMPORTANT SAFETY INSTRUCTIONS. 20 Items not recommended for dishwashing . 36 Preparing your appliance for an extended vacation . [. . . ] The drying fan will continue to run for a few minutes at the end of the "Express" program. You can now open the dishwasher and remove the dishes. , To avoid damage to counter tops rom steam, open the door after the end of the program either fully (never ajar) or keep it closed until you are removing all the dishes. Turning off At the end of a program: ^ Press the K button to turn the dishwasher off. The dishwasher continues to use electricity until turned off with the K button. The refill messages can be turned off when you use a tab detergent (see "Before using for the first time"). Fault messages cannot be turned off. Preparing your appliance for an extended vacation If you elect to turn off the water to your home for an extended period of time, please note that this may not be enough to reduce the risk of a leak. To be completely safe, you must turn off the water supply to each individual appliance. This means under the sink for a dishwasher, at the laundry bib for your washer, etc. 36 Use Unloading the dishwasher Dishes tend to break and chip more easily when they are hot. Allow the dishes to cool until they are comfortable enough to handle before unloading them. If you open the door fully after switching off, the dishes will cool much faster. ^ Unloading the lower basket first will prevent water drops from the upper basket and cutlery tray (depending on model) from dropping onto dishes in the lower basket. Interrupting a program A program is interrupted as soon as the door is opened. If the door is closed again, the program will continue from where it was interrupted. , Water in the dishwasher is hot. Only open the door if absolutely necessary and exercise extreme caution when doing so. Before closing the door again, leave it ajar for approx. This will enable the temperature in the wash cabinet to settle. Close the door firmly until it clicks into place. Changing a program If the detergent dispenser flap is already open, do not change the program. If a program has already started and you wish to change it: ^ Press the Start/Stop button for at least one second. The "Start/Stop" indicator light flashes. ^ Select and start the desired program. 37 Additional options Turbo The "Turbo" function can be used to reduce the program run-times, in programs in which the option is available. In order to achieve optimum cleaning results, consumption rates are increased when Turbo has been selected. ^ Press the K button to turn the dishwasher on. The "Start/Stop" indicator light flashes. The "Turbo" indicator light comes on. Once selected, the function will remain active for all programs until the setting is changed. Delay start The start time of a program can be delayed, for example to take advantage of lower night-time electricity rates. [. . . ] This allows for connection of the machine to either a hot (max. 140°F / 60°C) or cold water source. For lowest energy consumption and fastest possible wash times connect the dishwasher to a hot water source. All programs use hot water in the rinse cycles. [. . . ]