User manual MIELE CVA 4085

[. . . ] Operating and installation instructions Built-in coffee machine CVA 4085 To avoid the risk of accidents or damage to the machine, it is essential to read these instructions before it is installed and used for the first time. G M. -Nr. 06 867 310 Contents Caring for the environment . 15 Adding water, coffee beans or ground coffee . 16 Filling and emptying the water container. [. . . ] A tick will appear beside the user profile which is currently set. The Standard profile is allocated with standard settings. 44 Settings: Customising your machine Create To create a new User profile, ^ Touch the sensor beside "Set". ^ Touch the middle sensor on the right or left of the display until the first letter is highlighted. Then touch the sensor beside "Select character". ^ Repeat this step until the name you want for the new User profile appears in the display. To delete a letter or number, ^ touch the sensor beside "Delete character". The last letter or number will be deleted. To save the name, ^ Touch the sensor beside "ok". If you do not wish to save the name, ^ touch "+ C". Delete If you want to delete the User profile completely, ^ touch the sensor beside "Delete". ^ Touch the sensor beside the name you want to delete. ^ Touch the sensor beside "ok". As a safety measure, you will be asked if you are sure you want to delete the name. ^ Touch the sensor beside "Yes" if you are sure that you want to delete the selected name. The name you have selected will be deleted from the list. Change name ^ If you want to change a name, touch the sensor next to "Change name" and touch the sensor beside "ok". 45 Settings: Customising your machine ^ Now change the name and touch the sensor beside "ok". Change You can programme the machine so that it always reverts to the Standard profile or so that it continues to operate using a User profile you have set. To set the profile to be used: ^ touch the sensor beside "Change". You can now select one of the following: Do not change The machine will continue to operate using the User profile you have selected until you select another User profile. When switched on Each time the machine is switched on it will automatically select the Standard user profile regardless of which Profile was set before the machine was last switched off. After each use The machine will automatically revert to the Standard User profile each time a drink is dispensed. Selecting a user profile ^ In the main menu touch the sensor beside "Standard" and then touch the sensor beside the Profile you wish to set. ^ Then touch the sensor beside "ok". 46 Settings: Customising your machine Display You can adjust both the contrast and the brightness of the display: ^ Touch the sensor beside "Settings". Settings ß Water hardness ß User profile ß Display ^ Touch the sensor beside "Display". [. . . ] The colour of the correct replacement cover is that of the coloured insert in the base of the plug, or the colour that is embossed in words on the base of the plug (as applicable to the design of plug fitted). Replacement fuses should be ASTA approved to BS 1362 and have the correct rating. Replacement fuses and fuse covers may be purchased from your local electrical supplier. 81 Installation Building-in and combination options The coffee machine is designed to be built into a tall unit. It can also be combined with other Miele built-in appliances. If the coffee machine is to be built in above another appliance, there must be a full-width, closed shelf between them (except when it is combined with a Miele built-in plate warming drawer). [. . . ]