User manual MIELE CVA 4062

[. . . ] Operating and Installation Instructions Coffee System CVA 4062 CVA 4068 To prevent accidents and appliance damage read these instructions before installation or use. en - US, CA M. -Nr. 07 816 880 Contents IMPORTANT SAFETY INSTRUCTIONS. 11 Filling water, beans or ground coffee . 16 Coffee and espresso prepared from coffee beans . [. . . ] the amount Amount of coffee ^ Tap < or > until "Prog. the amount" is highlighted, confirm with OK. ^ Use < or > to select the beverage you wish to set a serving size for. ^ Select "Start", confirm with OK. Proceed as you would for programming using OK or - . 36 User profiles If the appliance is used by several people with different preferences, you can save up to 9 individual user profiles. The following settings can be programmed for each user profile: ­ Serving size for coffee beverages and hot water ­ Serving size of milk for beverages with milk ­ Amount of coffee ­ Water temperature ­ Pre-brew See "Setting the serving sizes" and "Settings". User profile q r H I J The following options appear only if you have already created a user profile: ­ Change user profile to change a user profile. ­ Delete user profile to delete a user profile. ­ Revert: The appliance can be set so that it automatically reverts to the Standard user profile or continues to use the most recently selected user profile set. Selecting a user profile ^ Use < or > to select the user profile you wish to use, confirm with OK. + q n Espresso John r H I J L m C L n m C ^ Tap < or > until "User profile" is highlighted, confirm with OK. You can now either: ­ Select user profile from the profiles already set. ­ Create user profile to enter a new user profile. To show that a user has been selected, the upper display line shows a large user n symbol. 37 User profiles Creating a user profile ^ Tap < or > until "Create" is highlighted, confirm with OK. If you try to create more than 9 user profiles, the message "Memory full" will appear, you will need to delete a profile to create space. Letters and numbers will now appear in the display. Use < or > to select the desired letters or numbers. A new word will always be capitalized, the appliance will then switch to lower-case letters. ^ Use < or > to select the desired characters. You will see the selected characters in the top line of the display. If you misspelled a word, use the arrow buttons to select the trash can symbol, confirm with OK. The last character entered will be deleted. Saving an entry ^ Once you have completed an entry, use < or > to select "OK", confirm with OK. The display will briefly show the User profile welcome screen, followed by the main menu. Canceling an entry ^ If you do not wish to save an entry you have made, use < or > to select "back A", confirm with OK. Changing a user profile ^ Select "Change user profile", confirm with OK. ^ Select the user profile you wish to change, confirm with OK. [. . . ] Do not connect the appliance to energy saving plugs or outlets. The reduction of power to the appliance caused by these devices will cause the appliance to run hot and may damage it and/or shorten its usable life. If there is any question concerning the electrical connection of this appliance to your power supply, please consult a licensed electrician or contact Miele's Technical Service Department. See back page for contact information. 67 WARNING: THIS APPLIANCE MUST BE GROUNDED Important The coffee system comes equipped with a 6 ft (1. 8 m) power cord with a NEMA 5-15P molded plug for connection to a 120 V, 15 A, 60 Hz power supply. Installation Installation options The coffee system is designed to be built into cabinetry. [. . . ]