User manual MIELE DA 229-2

[. . . ] Operating and installation instructions Ventilation System DA 229-2 To prevent accidents and machine damage, read these instructions before installation or use. V M. -Nr. 05 603 730 Table of Contents Warning and Safety instructions Guide to the appliance Functional description Operation Main power switch . 11 Reprogramming the grease filter timer . 12 Cleaning and Care Cleaning the casing . [. . . ] Do not attempt to change the bulbs until they have had sufficient time to cool down. Fingerprints or body oils deposited on the bulb will decrease the life of the bulb. Please follow the bulb manufacturer's instructions. ^ To change the halogen bulb first remove the lamp cover, a. ^ Pull the bulb, b, out of its socket and replace with a new one. Never use the lighting without the lamp cover, a, in place. The glass is specially made to filter harmful light rays. 16 After Sales Service In the event of a fault which you cannot correct yourself please contact: ­ Your Miele Dealer or ­ The Miele Technical Service Department USA CDN 1-800-999-1360 techserv@mieleusa. com 1-800-565-6435 service@miele. ca When contacting the Technical Service Department, please quote the model and serial number of your appliance. These are shown on the data plate which is visible when the grease filters are removed. 17 18 Installation instructions Table of Contents Caring for the environment Installation accessories Plywood backing Electrical data Appliance dimensions Installation Retaining plates . 35 Air extraction 20 Caring for the environment Disposal of packing material The cardboard box and packing materials protect the appliance during shipping. They have been designed to be biodegradable and recyclable. Ensure that any plastic wrappings, bags etc. are disposed of safely and kept out of the reach of children. Danger of suffocation! Disposal of an old appliance Old appliances may contain materials that can be recycled. Please contact your local recycling authority about the possibility of recycling these materials. Before discarding an old appliance, unplug it from the outlet and cut off its power cord and remove any doors to prevent hazards. See the Warning and Safety instructions. 21 Installation accessories 22 Installation accessories a 2 protective shields prevent scratches to the chimney during installation. b 2 hose clips for securing the ducting. c 1 reducing collar for use with 5" (125 mm) exhaust ducting. d 1 non-return flap 10 large headed screws 5 x 40 mm (S8 wall anchors included in the packaging are not for use in USA/CDN. ) e Upper retaining plate B secures the chimney extension. f Middle retaining plate C for additional stability of the chimney. g Lower retaining plate A secures the canopy and the motor assembly. 2 M 6 locking nuts for securing the motor assembly. 6 screws 5 x 60 mm 4 screws 3. 9 x 7. 5 mm for securing the chimney and the chimney extension. CAUTION: During the installation process, please be careful of sharp edges that can cause harm. 23 Plywood backing The majority of the weight of the installed ventilation system will be supported by retaining plate A. [. . . ] Do this carefully to prevent scratching the two pieces. ^ Slide the chimney down about 3/4" (2 cm) into the canopy. ^ Remove the protective shields. ^ Before using the appliance remove the grease filter and remove the protective foil from the filter frame. Return the filter. 35 Air extraction Danger of toxic fumes. [. . . ]