User manual MIELE DA 250-4

[. . . ] Operating and Installation Instructions Ventilation System DA 250-4 To prevent accidents and machine damage, read these instructions before installation or use. UV M. -Nr. 06 850 870 Contents IMPORTANT SAFETY INSTRUCTIONS . 29 2 IMPORTANT SAFETY INSTRUCTIONS Read these Operating Instructions carefully before installing or using the Ventilation System. This appliance is intended for residential use only. Use the appliance only for its intended purpose. [. . . ] + = increases the fan speed ­ = decreases the fan speed Levels "1" to "3" (green indicators) are usually sufficient for normal cooking. Intensive setting Level "4" (yellow indicator) should be used for a short period when frying or cooking food with a strong aroma. ­ light ^ Press the following buttons one after another, ­ the "­" button, and ­ the light button again. 10 Operation Fan performance The maximum air flow capacity is 625 cfm. Factors such as narrow duct diameter and bends will affect this value. Level 1 operates at 40% capacity Level 2 operates at 60% capacity Level 3 operates at 80% capacity Level 4 operates at 100% capacity If the power level indicators "1" and "4" flash, the automatic switch back is not activated. ^ To activate the automatic switch back press the "+" button. The power level indicators "1" and "4" light continuously. ^ To deactivate press the "­" button. ^ To save the setting press the "Delay Shut Down" button. If the procedure is not stored within 4 minutes of programming, the hood will automatically default to the "old" data. 11 Operation Delayed Shut Down If odors or smoke remain in the kitchen after cooking has been completed, the Delayed Shut Down feature can be selected to allow the hood to continue running for either 5 or 15 minutes. After that period of time the fan turns off automatically. Turning off the fan ^ Press the On/Off button to turn the fan off. This time can be lengthened or shortened to 20, 30, 40 or 50 hours. ­ A time of 20 hours should be programmed in kitchens with frequent pan or deep frying. ­ A time of 20 hours should also be programmed if the kitchen is only used occasionally to prevent grease which has accumulated over a long period of time from hardening on the filter, making cleaning more difficult. The lit "­/+" indicator shows the programmed time: 1st indicator from the left 2nd indicator from the left 3rd indicator from the left 4th indicator from the left = = = = 20 hours 30 hours 40 hours 50 hours ^ Use the "­/+" button to select the desired time. ^ Store the selection by pressing the grease filter button. ^ Press the On/Off button to turn off the fan. If the procedure is not stored within 4 minutes of programming the hood will automatically default to the "old" data. ^ Press the Delayed Shut Down and grease filter button at the same time. The indicator for the grease filter timer and one of the "­/+" indicators will flash. 15 Cleaning and care Stainless steel Before cleaning or servicing the hood, disconnect it from the power supply by either removing the fuse, unplugging it from the outlet or manually "tripping" the circuit breaker. Stainless steel surfaces can be cleaned using a non-abrasive stainless steel cleaner. To help prevent resoiling, a conditioner for stainless steel can also be used. Stainless steel colored controls These controls may become discolored or damaged if not cleaned regularly. Do not use a stainless steel cleaner on these controls. Cleaning the casing , Never use on the hood: - cleaning agents containing soda, acids, chlorides or thinners, - abrasive cleaning agents e. g. powder or cream cleansers, - steel wool or abrasive sponges, e. g. pot scourers or sponges which have been previously used with abrasive cleaning agents, - limescale removers, - caustic (oven) cleaners. [. . . ] 15 A WARNING: THIS APPLIANCE MUST BE GROUNDED Important To increase security before the machine is installed, it is recommended to install a protective switch (30 mA). 25 Appliance dimensions Exhaust connection 6" (150 mm) diameter 1) Entrance for ductwork and power cord 26 Installation Do not install this exhaust hood over cooktops burning solid fuel. Provided a larger distance is not given by the manufacturer of the cooktop, follow the minimum safety distances between a cooktop and the bottom of the hood: - 22" (550 mm) above electric cooktops, - 30" (762 mm) above gas cooktops, - 26" (650 mm) above an open electric grill or an open electric boiler/fryer. If there is more than one appliance beneath the hood and they have different minimum safety distances always select the greater distance. See "Important Safety Instructions" for further information. CAUTION: During the installation process, please be careful of sharp edges that can cause harm. 27 Installation Installation instructions ^ See the enclosed installation instruction sheet. [. . . ]