User manual MIELE DG 4080

[. . . ] Operating and Installation instructions Steam oven DG 4080 To avoid the risk of accidents or damage to the appliance it is essential to read these instructions before it is installed and used for the first time. GirZ M. -Nr. 06 923 330 Contents Warning and Safety instructions . 17 Cleaning and heating up for the first time . 23 Changing the settings during operation . [. . . ] It is best to deactivate it when you are cooking different types of food at the same time, e. g. when cooking whole meals and the dishes need to be put into the steam oven at different times. Remember that a lot of steam will be emitted when you open the door and that the Keeping warm function cannot be used. Time of day Display: You can choose whether you want the time of day to be displayed all the time when the appliance is switched off or for it to go out after 60 seconds. Clock format: The time of day can be set to appear either as a 24 hour or 12 hour clock. Set: Set the time of day 28 Settings Keeping warm You can activate or deactivate this function. the keypad tone which sounds each time a sensor is touched. Safety Once this setting has been changed to "On", you will be able to activate the system lock to prevent the steam oven being switched on unintentionally, by children for example. Pre-heat You can activate or deactivate this function. If pre-heating is activated, the main menu will appear in the display when the appliance is switched on. If no steam oven function is selected within a few seconds, the steam oven will begin heating up. Once the pre-heating process is finished you can place the food in the oven and select a function. If no food is placed in the oven at the end of the pre-heating process, the main menu will appear in the display after approximately 30 minutes. Units Temperatures can be displayed in °C or °F, and weights in kg or lbs. Miele{home If your appliance is fitted with a Miele|home communication module, you can use this setting to sign it on to or off from the Miele|home system. Recommended temperatures If you frequently change a recommended temperature it may be a good idea to change it permanently. You can change the temperatures within the permitted range. Showroom programme This programme is for dealers who want to demonstrate the appliance without the heating working. Factory default Water hardness The appliance can be set to the water hardness level for your area. All settings: any setting that you have altered will be reset to the factory default setting. User programmes: all saved user programmes will be deleted. Main menu: the main menu will be reset to the factory default setting. Recommended temperatures: recommended temperatures which have been changed will be reset to the factory default settings. 29 Display The contrast and brightness can be adjusted. Buzzer tones The volume, melody and duration can all be altered. You can also deactivate Practical tips Suitable containers Some stainless steel cooking containers are supplied with the appliance. Other containers, in a variety of sizes, both perforated and solid, are available as optional extras. When choosing the most suitable container for the particular food you are cooking, please note: ­ Use perforated cooking containers whenever possible, e. g. The steam can reach the food from all sides and the food is cooked evenly. ­ With large items of food, such as whole potatoes, the steam can work effectively because there are spaces between the individual pieces into which the steam can penetrate. This way a large quantity will take the same time to cook as a smaller amount and large, deep containers can be used. Where possible, space the food out to allow the steam more room. [. . . ] The wires in the mains lead are coloured in accordance with the following code: Green/yellow = earth Blue = neutral Brown = live WARNING: THIS APPLIANCE MUST BE EARTHED 58 Installation Non-rewireable plugs BS 1363 The fuse cover must be refitted when changing the fuse, and if the fuse cover is lost, the plug must not be used until a suitable replacement is obtained. The colour of the correct replacement cover is that of the coloured insert in the base of the plug, or the colour that is embossed in words on the base of the plug (as applicable to the design of plug fitted). Replacement fuses should be ASTA approved to BS 1362 and have the correct rating. Replacement fuses and fuse covers may be purchased from your local electrical supplier. [. . . ]