User manual MIELE DIAMOND G 5915 SCI

[. . . ] Operating Instructions Dishwasher G 5910 G 5915 To prevent accidents and appliance damage read these instructions before installation or use. en - US, CA M. -Nr. 07 909 210 Contents IMPORTANT SAFETY INSTRUCTIONS. 20 Items not recommended for dishwashing . 41 Preparing your appliance for an extended vacation . [. . . ] The program can now be started. 45 Additional options BrilliantLight The dishwasher is equipped with an interior light. With the door open the light turns off automatically after 15 minutes The light can also be deactivated. ^ Open and close the door quickly 3 times. The door must be opened enough so that the interior lighting turns on then off. From now on the interior lighting is turned off. ^ To turn the light on again, repeat the above process. 46 Settings ! The "Settings J" menu allows you to adjust standard settings Opening the Settings J menu ^ Turn the dishwasher on K. If the memory function is selected, the last selected program is displayed. Switch to the main menu by pressing "Clear" U. \ \ \ \ \ \ Main menu $ Settings F # Sensor Wash !Express 12:00 [ o[ 12:00 ^ Select Settings !. The display changes into the menu "Settings J". Settings $ Language F # Time of day !Water hardness [ o[ ^ Select the menu option you would like to change. Press the : button to see more information about the option currently selected. The selected options in the submenus are marked with a check L. 47 Settings ! Language J The display contents can be shown in different languages. The displayed language can be changed by the submenu "Language J". ^ Select the desired language and confirm with OK. The flag behind the word Language J serves as a guide when an unfamiliar language is selected. Select the respective menu with a flag until the submenu Language J appears. Time of day This selection allows the clock to be shown as 24 or 12 hours. If the Standby option is turned on, the clock will only be displayed for a few minutes. ^ Select the desired setting and confirm with OK. Setting the clock format ^ Select Format. ^ Select the desired clock format and confirm with OK. Set the time of day ^ Select Set manually. ^ Set the hour with +/- and confirm with OK. After confirming the minutes with OK, the display will revert to the previous menu. [. . . ] 140°F / 60°C) or cold water source. For lowest energy consumption and for fastest possible wash times connect the dishwasher to a hot water source. All programs use hot water in the rinse cycles. ­ To use the "Energy Saver" program, a hot water connection of minimum 115°F / 45°C and maximum 140°F / 60°C (water intake temperature) is necessary. [. . . ]