User manual MIELE DIMENSION G 5575 SCSF

[. . . ] Operating Instructions Dishwasher G 5570 G 5575 To prevent accidents and appliance damage read these instructions before installation or use. en - US, CA M. -Nr. 09 016 340 Contents IMPORTANT SAFETY INSTRUCTIONS. 17 Items not recommended for dishwashing . 36 Preparing your appliance for an extended vacation . [. . . ] Cleaning performance in the lower basket is intensified in programs where this function is available. Depending on the program, this can mean that the running time may be extended slightly. ^ Press the K button to turn the dishwasher on. ^ Press the Intensive lower basket button. The Intensive lower basket indicator light will come on if the function is available for the program which has been selected. ^ Start the program by closing the door. Once set, the function will remain active for the program selected until the setting is changed. Turbo The "Turbo" function can be used to reduce the program run-times, in programs in which the option is available. ^ Press the K button to turn the dishwasher on. The Turbo indicator light will come on if the function is available for the program which has been selected. ^ Start the program by closing the door. Once selected, the function will remain active for all programs until the setting is changed. 38 Additional options Delay start The start time of a program can be delayed. The start time can be delayed from 30 minutes to 24 hours. The delay is set in 30 minute increments. When using the "Delay start" function, make sure that the detergent compartment is dry before adding detergent. Otherwise the detergent could stick together and not completely rinse out. The detergent could leak out of the compartment. ^ Press the K button to turn the dishwasher on. ^ Select the desired program with the "Program" button. The last delay start time will show in the time display. ^ Set the desired delay start time with the , button. If you press and hold the , button, the time will automatically count up to 24 h. To start again at 30 minutes, press the , button twice. [. . . ] 140°F / 60°C) or cold water source. For lowest energy consumption and for fastest possible wash times connect the dishwasher to a hot water source. All programs use hot water in the rinse cycles. ­ To use the "Energy Saver" program, a hot water connection of minimum 115°F / 45°C and maximum 140°F / 60°C (water intake temperature) is necessary. [. . . ]