User manual MIELE EGW2060-PLATE WARMER

[. . . ] Before installation make sure that the voltage and frequency listed on the data plate correspond with the household electrical supply. This data must correspond in order to avoid risk of damage to the appliance. If in doubt, consult a qualified technician. The electrical safety of this appliance can only be guaranteed when continuity exists between the appliance and an effective grounding system. [. . . ] Turn the temperature selector to "Maximum" (see "Selecting a temperature"). ^ Vent the room when heating the drawer for the first time. Metal components have a protective coating which may give off a slight odor the first time your new appliance is heated. The smell will dissipate after a short time and does not indicate a faulty connection. 6 Using the plate warmer Opening and Closing The plate warmer is only intended for warming dishes. Do not use the plate warmer to reheat, cook or keep food and drinks warm. Condensation from food or drinks could cause moisture damage to the appliance. The drawer can hold a maximum of 33 lbs (15 kg). The floor of the warming drawer has a non-slip mat to prevent plates and dishes from sliding when the drawer is opened and closed. ^ To open and close the plate warmer gently push the center of the drawer. Controls The controls include the temperature selector and the On/Off button. They are only visible when the drawer is open. The indicator at the front shows if the plate warmer is turned on or off. 7 Using the plate warmer Warming dishes ^ Place the dishes in the plate warmer. ^ The indicator at the front of the appliance lights showing that the unit is on. ^ Turn the appliance off (k), when removing the warmed dishes. ^ Pull the drawer out all the way to remove the dishes. Do not turn the knob counterclockwise past the 12 o'clock position or clockwise past the 6 o'clock position. Forcing it beyond these positions will damage the temperature selector. When the selected temperature is reached, the heating element will turn off. It turns on again, when the unit cools below the selected temperature. The optimum temperature to preheat cups and glassware is about 105 °F (40 °C). When prewarming cups to this temperature, the drinks will not cool as fast and the cup itself is still cool enough to touch. Selecting a temperature The temperature selector allows you to select a temperature between 86 ° and 122 °F (30 ° and 50 °C). 8 Using the plate warmer Warming times Various factors will affect the warming times: ­ type and thickness of the dishes, ­ quantity, ­ how the dishes are arranged, and ­ temperature setting. As you use the plate warmer you will learn which settings suit your needs best. 30 - 40 minutes to evenly warm dishes at the maximum temperature setting of 122°F (50°C). Capacity The quantity which can be loaded will depend on the size of your dishes. [. . . ] The electrical outlet should be easily accessible after the unit is installed. Only install the plate warmer in combination with other built-in appliances recommended by the manufacturer. If installed with appliances not recommended, the warranty is void since the manufacturer cannot guarantee its safety. All electrical work should be done by a qualified technician, in strict accordance with national and local safety regulations. [. . . ]