User manual MIELE G 2870

[. . . ] Operating instructions for dishwashers To avoid the risk of accidents or damage to the appliance it is essential to read these instructions as well as the installation plan before it is installed and used for the first time. G M. -Nr. 06 702 740 Contents Description of the appliance . 14 Before using the appliance for the first time you require: . 16 "Insufficient salt" message . [. . . ] ^ Select the Cancel function and confirm with OK. The d indicator light will go out. Sensor wash Programme finished 12:00 Main menu } ^ Select the Main ^ Select Start. ^ Close the door. menu option. ^ Select the programme you want. The In-operation indicator lights up. The programme starts. 41 Cleaning and care Cleaning the reflector panel Check your dishwasher regularly (approx. This way faults and problems can be avoided. The reflector panel for the In-operation indicator light is situated in the coverplate underneath the worktop. It can be taken out of its plastic holder to be cleaned. ^ Open the door and carefully remove the reflector panel from the holder. ^ The reflector panel and its plastic holder should only be wiped with a damp cloth or a suitable cleaning agent designed for use on plastic. ^ Replace the reflector panel in its holder. Cleaning the wash cabinet The wash cabinet is largely self-cleaning, provided that the correct amount of detergent is always used. If, however, there are limescale or grease deposits in the cabinet these can be removed with a proprietary dishwasher cleaner, such as the Miele dishwasher cleaner (available from the Miele UK Spare Parts Department). , Do not use abrasive cleaning Cleaning the door and the door seal ^ Wipe the door seals regularly with a damp cloth to remove food deposits. ^ When the dishwasher is being loaded, food and drink residue may drip onto the sides of the dishwasher door. These surfaces are outside the wash cabinet and are not accessed by water from the spray arms. Any soiling should be wiped off these surfaces before the door is closed. E-Cloth ^ A microfibre "E-Cloth" is available from the Miele UK Spare Parts Department, which is suitable for cleaning surfaces such as stainless steel, glass, plastic and chrome without the use of chemicals. agents, glass cleaning agents or all-purpose cleaners. Because of their chemical composition, they could cause serious damage to surfaces. 42 Cleaning and care Cleaning the control panel Cleaning the door front , Do not use abrasive cleaning agents, glass cleaning agents or all-purpose cleaners. Because of their chemical composition, they could cause serious damage to surfaces. ^ This should only be wiped with a damp cloth. , Do not use any cleaning agents containing ammonia or thinners. These would damage the surface structure. ^ Clean the front using a Miele E-Cloth or with a suitable cleaning agent for the type of material the front is made of. Follow the manufacturer's instructions. ^ Door fronts made from wood should only be cleaned using a damp cloth, and then dried with a soft cloth. [. . . ] ^ Confirm the messages displayed with OK. If signing on is unsuccessful: ^ Check that the Miele|home system is active. ^ Activate the signing on of a new appliance on the Miele|home system. ^ Repeat the signing on process on the dishwasher. 77 Settings menu J Signing off You can sign off the dishwasher if you no longer want the programme data to be transmitted. [. . . ]