User manual MIELE G2630

[. . . ] Operating instructions Excella Series G 2630 SCi To prevent accidents and machine damage read these instructions before installation or use. UV M. -Nr. 06 696 110 Contents IMPORTANT SAFETY INSTRUCTIONS . 18 Items not recommended for dishwashing . 49 General problems with the dishwasher . [. . . ] The rinse aid refill message is activated. Gel When using gel detergent, salt and rinse aid should be added for best results. See "Filling the salt container" and "Rinse aid" for more info. The rinse aid refill message is activated. "2 in 1" tabs The function "2 in 1" adjusts the program cycle to the use of "2 in 1" detergent products (detergent with rinse aid). The rinse aid dosage and the rinse aid refill message are deactivated. 40 Settings J "3 in 1" tabs The function "3 in 1" adjusts the program cycle to the use of "3 in 1" detergent products (detergent with rinse aid and water softener salt). The rinse aid dosage and rinse aid refill messages are deactivated. The salt usage for the water softener will be reduced to 1/3 -1/4 of the normal amount. Do not use this extra feature : ­ when using "2 in 1" detergents (detergent with rinse aid) ­ if your tab water has a water hardness of over 21°. See also the information from the detergent manufacturer. The cleaning and drying performance of these detergent products vary. Water hardness The dishwasher is equipped with a sensor softener, which automatically detects the hardness of your tap water. After plumbing the dishwasher and finishing a program, e. g. "Rinse + Hold", the water hardness is displayed in the menu "Water hardness". ^ Press OK to go back to the "Settings J" menu. External water softener If the dishwasher is connected to an external water softener unit which is regenerated with salt, the water hardness must still be set in the dishwasher. Set the dishwasher to the water hardness of your water softener unit. If you don't know the value, set the dishwasher water hardness to 8°d (8 gr/gal [US]). ^ Set the dishwasher to the water hardness of the external water softener and confirm with OK. If the dishwasher is not longer connected to an external water softener, set the setting to Auto. The detergent selection is set by default to powder detergent. ^ Select the desired detergent and confirm with OK. 41 Settings J Rinse aid For best results the rinse aid dosage can be adjusted. The dosage can be set between 0 and 6 ml. The dosage set by default to 3 ml of rinse aid per program. ^ Use a higher setting if spots appear on dry glassware. [. . . ] For fastest possible wash times, with slightly higher energy consumption, connect the dishwasher to a hot water source. All programs use hot water in the rinse cycles. ­ To use the "Energy Saver" program, a hot water connection of minimum 115°F / 45°C and maximum 140°F / 60°C (water intake temperature) is necessary. The higher the water intake temperature, the better the cleaning and drying results. [. . . ]