User manual MIELE G2670

[. . . ] Operating instructions Excella Series G 2670 SC To prevent accidents and machine damage read these instructions before installation or use. UV M. -Nr. 06 696 120 Contents IMPORTANT SAFETY INSTRUCTIONS . 18 Items not recommended for dishwashing . 37 2 Contents Additional functions . [. . . ] The displayed language can be changed by the submenu "Language J". ^ Select the desired language and confirm with OK. The flag behind the word "Language J" serves as a guide when an unfamiliar language is selected. In this case select the respective menu with a flag until the submenu Language J shows. Time of day This selection allows the clock to be shown as 24 or 12 hours. Setting the clock format ^ Select Format. ^ Select the desired clock format and confirm with OK. Set the time of day ^ Select Set manually. ^ Set the hour with +/- and confirm with OK. After confirming the minutes with OK the display changes back to the previous menu. To switch back to "Settings J", select +C (Clear). 41 Settings J Detergent To achieve the best results the used detergent can be set on your dishwasher. The selection allows "Powder", "Gel", "2 in 1" and "3 in 1" tabs. The program cycle sequence will be adjusted for the selected detergent. Depending on the program the program running time may increase. Powder When using powder detergent, salt and rinse aid must be added for best results. See "Filling the salt container" and "Rinse aid". The rinse aid refill message is activated. Gel When using gel detergent, salt and rinse aid should be added for best results. See "Filling the salt container" and "Rinse aid". The rinse aid refill message is activated. 2 in 1 tabs The function "2 in 1" adjusts the program cycle to the use of "2 in 1" detergent products (detergent with rinse aid). The rinse aid dosage and the rinse aid refill message are deactivated. 3 in 1 tabs The function "3 in 1" adjusts the program cycle to the use of "3 in 1" detergent products (detergent with rinse aid and water softener salt). The rinse aid dosage and rinse aid refill messages are deactivated. [. . . ] All programs use hot water in the rinse cycles. ­ To use the "Energy Saver" program, a hot water connection of minimum 115°F / 45°C and maximum 140°F / 60°C (water intake temperature) is necessary. The higher the water intake temperature, the better the cleaning and drying results. A 5 ft (1. 5 m) flexible metal hose (pressure resistant up to 2030 psi) is available. [. . . ]