User manual MIELE H 4042 BM

[. . . ] Operating and Installation Instructions Convection microwave oven H 4042 BM To prevent accidents and machine damage read these instructions before installation or use. en - US, CA M. -Nr. 07 825 470 Contents IMPORTANT SAFETY INSTRUCTIONS. 53 3 IMPORTANT SAFETY INSTRUCTIONS When using electrical appliances always observe basic safety precautions, including the following: WARNING - To reduce the risk of burns, electric shock, fire, injury to persons, or exposure to excessive microwave energy: Read all instructions before installing or using the oven. Read and follow the specific, "PRECAUTIONS TO AVOID POSSIBLE EXPOSURE TO EXCESSIVE MICROWAVE ENERGY". [. . . ] The countdown of the duration will being in the display. At the end of the combi function: ­ the oven heating automatically turns off. ­ if the signal tone is switched on, a signal will sound (see "Settings %"). ^ Turn the function selector to "0". All signals turn off. ^ While the triangle V is flashing, use W to enter the desired duration in minutes:seconds (e. g. , 1:30 minutes). Depending on the power level selected, you can enter a time of up to 2 hours. 25 Using the oven Solo functions Functions without microwave ^ Place food in the oven. ^ Select the desired function (e. g. , Convection Bake). The display will show: Temperature indicator 3 In addition to the temperature, the Temperature indicator 3 also appears in the display. It will always light when the oven heating is turned on. When the selected temperature is reached, ­ the oven temperature goes out. ­ the temperature indicator 3 goes out. ­ if the signal tone is turned on, a signal sounds (see "Settings %"). Should the temperature fall below the value set, the oven heating and temperature indicator will turn on again. 3 6m V 325 ­ the default temperature "325", ­ Temperature indicator 3, ­ the triangle V below the 6 symbol. The heating, lighting and cooling fan turn on simultaneously. Once the selected temperature is reached, the temperature indicator goes out and a signal sounds. ^ After the cooking process, turn the function selector to "Off" and remove the food from the oven. Cooling fan The cooling fan will continue running for some time so that moisture cannot condense in or around the oven. It will turn off automatically once the oven has cooled down to a factory set temperature. Rapid Heat Default temperature . 325°F (160°C) Rapid Heat can be used to pre-heat the oven. ^ Set the required temperature using the temperature selector. ^ After the temperature indicator 3 goes out and the signal sounds, select the desired function and place the food in the oven. 26 Using the oven End of a cooking process After the Duration elapses: ­ the oven heating automatically turns off. ­ the cooling fan remains running after a function with microwave. [. . . ] Hold the bulb cover firmly so it does not fall. As a precaution, place a dish towel on the floor of the oven and the open door. ^ Unscrew the bulb cover with a Torx screwdriver (T20) and remove the cover. ^ Pull out the halogen bulb. 45 Technical Service In the event of a fault which you cannot easily fix yourself, please contact the Miele Technical Service Department at the phone number on the back of this booklet. MieleCare (USA only) MieleCare, our Extended Service Contract program, gives you the assurance of knowing that your appliance investment is covered by 5 years of worry free ownership. MieleCare is the only Extended Service Contract in the industry that guarantees repairs by a Miele Authorized Service Provider using genuine Miele parts. [. . . ]