User manual MIELE KM427
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual MIELE KM427. We hope that this MIELE KM427 user guide will be useful to you.
Lastmanuals help download the user guide MIELE KM427.
You may also download the following manuals related to this product:
MIELE KM427 (258 ko)
MIELE KM427 INSTALLATION MANUAL (318 ko)
Manual abstract: user guide MIELE KM427
Detailed instructions for use are in the User's Guide.
[. . . ] To prevent damage, install cabinetry and the venting hood before installing the cooktop. The countertop must be bonded with heat resistant (212 °F/100 °C) adhesive to prevent distortion or dissolving. The cooktop should only be installed as shown in the illustrations, while maintaining the required safety distances shown. Do not install the cooktop between two tall cabinets as this is a fire hazard. [. . . ] cabinetry, venting hood or utensil rail. If the manufacturer of these items states a different figure, then this safety distance should be followed.
If more than one appliance is installed beneath a venting hood, and they have different minimum safety distances to the hood, select the higher safety distance of the two.
4
Appliance and cut-out dimensions
KM 421
3 3 8" m) (85m
5
(8m
16
"
20
33 " (85 8 mm )
m)
(5
" ) 2mm 3
15
16
(614
243 16"
mm)
b
* max. R3/16 " max. R4mm
(7 2 15
2 " . 50) n mi ( (60 23 5 8 " 0m m)
20 mm 8
3
8
)
5m16" m
(
51
)
(7 2 1 5m 5 16" m )
b
a Spring clips ^ Make the countertop cut-out following the dimensions given in the illustration. ^ Remember to maintain a minimum distance of 2" (50 mm) between the rear wall and a right or left hand side wall. See also "Important safety instructions". ^ Seal the cut surfaces with a suitable heat resistant sealant to avoid swelling caused by moisture.
If, during installation, the seal around the frame does not sit flush with the countertop on the corners, the corner radius max. R4 (3/8") can be carefully filed down to fit. 3/8" drill bit.
5
Appliance and cut-out dimensions
KM 424
3 3 8" m) (85m
5
(8m
33 " (85 8 mm )
m)
16
"
20
15
16
"
(53
) 2mm
30 1 16"
(763m
m)
b
* max. R3/16 " max. R4mm
(7 5m
2 " n. 50 i
m
m
2 15 )
16
"
(74
29 1
9m
2
"
(
3
20
8
m)
8 51
mm
)
2 15 (7 5m m
16
"
b
)
a Spring clips ^ Make the countertop cut-out following the dimensions given in the illustration. ^ Remember to maintain a minimum distance of 2" (50 mm) between the rear wall and a right or left hand side wall. See also "Important safety instructions". ^ Seal the cut surfaces with a suitable heat resistant sealant to avoid swelling caused by moisture.
If, during installation, the seal around the frame does not sit flush with the countertop on the corners, the corner radius max. R4 (3/8") can be carefully filed down to fit. 3/8" drill bit.
6
Appliance and cut-out dimensions
KM 427
3 3 8" m) (85m
5
3 3 " mm) (85 8 mm )
(8
16
"
20
15
16
"
m)
16 (903 " mm)
(532m
35 9
* max. R3/16 " max. R4mm
21 (7 215 5m 16" m )
b
35 (88 " 9m
2 " . 50) n mi ( m)
20 8m 1
38
"
m)
(5
(7 2 15 5m 16" m )
b
a Spring clips ^ Make the countertop cut-out following the dimensions given in the illustration. ^ Remember to maintain a minimum distance of 2" (50 mm) between the rear wall and a right or left hand side wall. See also "Important safety instructions". ^ Seal the cut surfaces with a suitable heat resistant sealant to avoid swelling caused by moisture.
If, during installation, the seal around the frame does not sit flush with the countertop on the corners, the corner radius max. R4 (3/8") can be carefully filed down to fit. 3/8" drill bit.
7
Installation
Installing the spring clips
(75m m) 3 "
Granite countertops
b
^ Fix the supplied spring clips, a, at the marked positions as shown above, by laying them on the upper edge of the cut-out and then securing them with the 3. 5 x 25 mm screws supplied.
For granite countertops, the spring clips, b, must be placed in position and secured with double-sided tape. In addition, coat the edges of the spring clips with silicone sealant. The screws are not needed for granite countertops.
8
Installation
Installing the cooktop
^ Feed the power cord down through the cut-out and connect the appliance to the power supply. ^ Position the cooktop on the spring clips, a. [. . . ] For further information, see the wiring diagram provided with the appliance.
Power supply: Please check the data plate. KM 421: 240 VAC, 60 Hz, 30 A fuse rating, 208 VAC, 60 Hz, 30 A fuse rating. KM 424: 240 VAC, 60 Hz, 40 A fuse rating, 208 VAC, 60 Hz, 40 A fuse rating. KM 427: 240 VAC, 60 Hz, 50 A fuse rating, 208 VAC, 60 Hz, 50 A fuse rating. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE MIELE KM427
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual MIELE KM427 will begin.
