User manual MIELE KM5840

[. . . ] Operating and Installation Instructions Ceramic Cooktop KM 5840 KM 5860 KM 5880 To prevent accidents and appliance damage, read these instructions before installation or use. en - US, CA M. -Nr. 07 844 710 2 Contents IMPORTANT SAFETY INSTRUCTIONS. 18 Turning off and residual heat indicators . 24 Using both timer functions at the same time . [. . . ] The timer starts counting down. h After several seconds, the m touch control light turns steady, and the timer begins to count down. 22 Timer To change the set time ^ Touch the m control. ^ Set the desired time as described in "Setting the timer". To clear the set time ^ Touch the m control. ^ Touch "0" on the settings bar. 23 Timer Turning a burner off automatically You are able to set a time in which a burner turns off automatically. If desired, all of the burners can be programmed at the same time. If the programmed time is longer than the maximum time allowed, the burner will turn off automatically after the maximum time allowed (see "Safety cut-out feature"). ^ Select a power level for the desired burner. ^ Tap the m touch control until the indicator light for the burner starts flashing. If several burners are on, the indicator lights will flash in a clockwise direction, starting with the left front. The time remaining is shown in the timer display and can be changed at any time. If you want to set another burner to turn off automatically, follow the same steps as previously described. If more than one shut-off time is programmed, the shortest time remaining will be displayed, and the indicator light for that particular burner will flash. The other indicator lights will be steady. If you want to check on the remaining time for another burner, touch the m control until the indicator light for the respective burner flashes. 24 Timer Using both timer functions at the same time The kitchen timer and automatic shut-off functions can be used at the same time. If you have programmed one or more shut-off times and would also like to set the kitchen timer: Tap the m touch control until the indicator lights for the programmed burners come on steady and 00 appears in the timer display. If you have set the timer and would also like to program one or more shut-off times: Tap the m touch control until the indicator light for the desired burner flashes. The shortest remaining time will appear in the display. If you would like the other remaining times to be displayed, tap the m control until: - the indicator light for the desired burner flashes (automatic shut-off). - the timer display flashes (kitchen timer). Starting with the shortest remaining time, which is shown in the display, all burners that are in use and the kitchen timer are selected in a clockwise direction. 25 Safety features Child safety lock / System lock Your appliance is equipped with a safety lock to prevent the cooktop and the burners from accidentally being turned on or any settings changed. The Child safety lock can be activated when the cooktop is turned on. When the safety lock is activated, the cooktop has only limited functions: ­ The burner power levels and the timer settings cannot be changed. [. . . ] Do not permanently seal into the countertop. If during installation the seal around the frame does not sit flush with the countertop in the corners, the corner radius, maximum 3/16" (4 mm), can be carefully filed down to fit. ^ Connect the appliance to the main power supply (see "Electrical connection"). ^ Turn the appliance on and check the function. The appliance may be lifted out using a special tool. [. . . ]