User manual MIELE S428I

[. . . ] Parts made of bioplastics are environmentally friendly because they have been derived from renewable biomass sources. Some parts still need to be made of conventional plastics, but for these parts Philips tries to use recycled plastics as much as possible. This production method results in considerably less waste than the traditional method. For more information on this and other environmental efforts of Philips, please visit www. [. . . ] To connect the tube to a nozzle, press the spring-loaded lock button on the tube and insert the tube into the nozzle. Fit the spring-loaded lock button into the opening in the nozzle (`click'). - To disconnect the nozzle from the tube, press the spring-loaded lock button and pull the accessory out of the tube. Accessory holder (specific types only) 1 Slide the accessory holder with accessories onto the handgrip (`click'). To detach the accessory holder, squeeze the release levers together (1) and slide the accessory holder off the handgrip (). Crevice tool and small nozzle 1 Connect the crevice tool (1) or small nozzle () with or without brush attachment () to the tube or directly to the handgrip. Brush attachment (specific types only) 1 To assemble the brush attachment, slide it onto the bottom of the small nozzle (`click'). To disassemble the brush attachment, slide it off the bottom of the small nozzle. - The side brushes catch more dust and dirt at the sides of the nozzle and allow you to clean better along furniture and other obstacles. The opening at the front of the nozzle allows you to suck up larger particles. 1 Usethehardfloorsettingtocleanhardfloors(forinstancefor tiled, parqueted, laminatedandlinoleumedflooring):pushtherocker switch on top of the nozzle with your foot to make the brush strip come out of the housing. Pull at the cardboard tag to remove the full dustbag from the holder . , When you do this, the dustbag is sealed automatically. Slide the cardboard front of the new dustbag into the two grooves of the dustbag holder as far as possible. Note: If no dustbag has been inserted, you cannot close the cover. Emptying the reusable dustbag (some countries only) In some countries, this vacuum cleaner also comes with a reusable dustbag that can be used and emptied repeatedly. You can use the reusable dustbag instead of disposable dustbags. to remove and insert the reusable dustbag , simply follow the instructions in `Replacing the disposable dustbag'. To empty the reusable dustbag: 1 Slide the clip off the dustbag sideways. To close the dustbag, slide the clip back onto the bottom edge of the dustbag. cleaning and maintenance of filters Alwaysunplugtheappliancebeforeyoucleanorreplacethefilters. Permanent motor protection filter Clean the permanent motor protection filter every time you empty the reusable dustbag or replace the disposable dustbag. [. . . ] Ordering dustbags - Philips Classic s-bag ` synthetic dustbags are available under type number FC8021. - Philips Clinic s-bag ` high filtration synthetic dustbags are available under type number FC8022. - Philips Anti-odour s-bag ` synthetic dustbags are available under type number FC8023. - Reusable dustbags (some countries only) are available under code number 4322 004 93290. [. . . ]