User manual MIELE T 4839 CI

[. . . ] Operating instructions for condenser tumble dryer T 4839 Ci To avoid the risk of accidents or damage to the machine it is essential to read these instructions before it is installed and used for the first time. G M. -Nr. 06 731 780 Caring for the environment Disposal of the packing material The transport and protective packing has been selected from materials which are environmentally friendly for disposal and can normally be recycled. Ensure that any plastic wrappings, bags etc. are disposed of safely and kept out of the reach of babies and young children. [. . . ] stuffed toys, and which have the q symbol on the care label. Weight of dry laundry 24 Changing the programme sequence Changing a programme while it Interrupting a programme is running ^ Switch the dryer off. You cannot change to another programme once a programme has started (this prevents unintentional alterations). If an attempt is made to change a selection, Option not possible will appear in the display. It is still possible to select or deselect the Anti-crease and Buzzer extra options. You will need to cancel the current programme before you can select a new one. To continue drying ^ Switch the dryer on. The programme will continue, as long as the cooling down phase has not been reached. Adding or removing laundry after a programme has started ^ Press the Door button. ^ Open the door. , Do not touch the back of the drum when adding or removing items. The drum could be very hot danger of burning. ^ Press the Start/Stop button. Cancelling a programme ^ Press the Start/Stop button. The "Stopped" option Cancel programme will appear in the display. ^ Confirm by pressing the right hand Menu button under OK. The items will be cooled down, depending on the temperature reached and how long they have been dried for. If you press the Start/Stop button during the cooling down phase and confirm by pressing the right hand Menu button under OK, Finished will appear in the display. ^ Switch the dryer off and then on again. ^ You can now select a different programme. Note The time remaining shown in the display may now vary from the actual drying time. 25 Cleaning and care Emptying the condensed water container The condensed water will be collected in the condensed water container unless the appliance has been fitted with a drain hose (see installation). Empty the condensed water container after every drying programme. The drying programme will be interrupted if the maximum level of the condensed water container is reached. A message will appear in the display. ^ Open the shutter and empty out the water. ^ To replace the container, hold it at a slight angle (as when removing it) and push it in gently until you feel it click into position. ^ To remove the message from the display, switch the dryer off and then on again. It could lead to health problems for people and animals. [. . . ] Confirm your selection of this number by pressing the right hand Menu button under OK. ^ Repeat the process until all three numbers have been entered. 57 Settings menu J Confirm lock code 250 Back A OK ^ Confirm the lock code by pressing the right hand Menu button under OK or, if you have made a mistake, press the left hand Menu button under Back A. The following will appear in the display: X Lock code activated. Entry OK Once the machine is switched off, it can only be used again if the lock code is entered. [. . . ]