User manual MIELE T 8685 C

[. . . ] Operating instructions for condenser tumble dryer T 8685 C To avoid the risk of accidents or damage to the machine it is essential to read these instructions before it is installed and used for the first time. G M. -Nr. 06 731 760 Caring for the environment Disposal of the packing material The transport and protective packing has been selected from materials which are environmentally friendly for disposal and can normally be recycled. Ensure that any plastic wrappings, bags etc. are disposed of safely and kept out of the reach of babies and young children. [. . . ] Max load: depending on fabric type Note Minimum iron hygiene - Normal (drying level) Fabric type Note Timed drying hygiene Fabric type * ­ 6 kg* of items made of cotton or linen fabric. ­ 3 kg* of minimum iron items made of synthetic or blended fabric. ­ For airing individual items of laundry which are already dry or for deactivating lice, dustmites and micro-organisms in washable materials which are suitable for drying in a tumble dryer, e. g. stuffed toys, and which have the q symbol on the care label. Weight of dry laundry 27 Changing the programme sequence Changing a programme while it Interrupting a programme is running ^ Switch the tumble dryer off by You cannot change to another programme once a programme has started (this prevents unintentional alterations). You will need to cancel the current programme before you can select a new one. To continue drying ^ Switch the tumble dryer on again by pressing the s button. The programme will continue, as long as the cooling down phase has not been reached. Cancelling a programme ^ Press short cut button 4 Cancel. The items will be cooled down, depending on the temperature reached and how long they have been dried for. Adding or removing laundry after a programme has started ^ Press the a button. ^ Open the door. Finish will appear when you press short cut button 4 Cancel again. ^ Switch the tumble dryer off by pressing the s button. ^ Switch the tumble dryer on again by pressing the s button. ^ Select a different programme. , Do not touch the back of the drum when adding or removing items. The drum could be very hot danger of burning. ^ Press the Start button. Note The time remaining shown in the display may now vary from the actual drying time. 28 Electronic programme locking Programme locking prevents the short cut buttons or the multi-function selector being used while drying is in progress. The door is not locked and can be opened at any time. To activate programme locking ^ Once the programme has begun, press and hold the Start button until the following appears in the display: X System locked Now no more alterations can be made to the programme. Programme locking is deactivated automatically at the end of the programme or by pressing button a. To deactivate programme locking ^ Press and hold the Start button until the following appears in the display: W Ready 29 Cleaning and care Emptying the condensed water container The condensed water will be collected in the condensed water container unless the appliance has been fitted with a drain hose (see installation). Empty the condensed water container after every drying programme. The drying programme will be interrupted if the maximum level of the condensed water container is reached. A message will appear in the display. ^ Open the shutter and empty out the water. ^ To replace the container, hold it at a slight angle (as when removing it) and push it in gently until you feel it click into position. [. . . ] Signing on Settings Mieleqhome Back A Sign on ^ Select Sign on and confirm your selection. If signing on is successful, the following will appear after a while: k Sign on successful When the dryer is in operation, programme data will be transmitted from it over the power lines. 61 Settings menu J If signing on is unsuccessful: ^ Check that the Miele|home system is active. ^ Activate the signing on of a new appliance on the Miele|home system. ^ Repeat the signing on process on the dryer. [. . . ]