User manual MIELE T1329C-CONDENSER DRYER

[. . . ] Operating Instructions Condenser Dryer T 1329 C To prevent accidents and machine damage read these instructions before installation or use. UV M. -Nr. 06 057 180 Contents IMPORTANT SAFETY INSTRUCTIONS . Turn on the dryer and load the laundry . 12 Adding or removing laundry during a program . [. . . ] If no lint is visible: ^ Return the condenser. If lint is visible: ^ Clean the condenser as described. ^ Pull out the condenser. 18 Dryer care Cleaning the condenser ^ Rinse the condenser along all sides with warm water as shown in pictures below. Returning the condenser ^ Put the condenser back in place in the reverse order. Check the gasket around the front of the condenser is flush and not crimped. ^ To prevent leaks, make certain the condenser is pushed in all the way and locked in place. ^ Restore power. ^ Check the condenser for visible soiling. Continue rinsing until the condenser until clean. ^ Check the condenser gasket for soiling. ^ Place the condenser lengthwise on a towel to air dry. 19 Dryer care Changing the light bulb ^ Replace the light bulb with a temperature proof bulb, available from Miele. The light bulb must not exceed the maximum wattage listed on the data plate. ^ Flip up the light bulb cover and press it firmly until it clicks into place. , To reduce the risk of electric shock, disconnect the dryer from the power supply by shutting off the power main, tripping the circuit breaker or unplugging the power cord before performing maintenance. ^ Open the door. The bulb cover is located along the upper rim of the drum opening. , Make sure the bulb cover is ^ Restore power. securely closed to prevent a short circuit or penetrating moisture. ^ Slide a screwdriver with a wide head underneath the side edge of the bulb cover and twist (see illustration). ^ Flip down the bulb cover. 20 Quick Guide Remove this guide for easy reference Please read all instructions, especially the "Important Safety Instructions", before using the dryer. Quick Guide 1. Turn on the dryer and load the laundry 2. Select a program ^ Press the "On/Off" button to turn on the dryer. ^ Press the "Door" button to open the door. Make sure that there is enough space in the drum for clothes to tumble freely. ^ Press the e or - button until the desired program indicator lights. Select a drying option (if needed) To prevent fabric damage, check that laundry will not be caught in the closed door. ^ Close the door with a firm swing - do not push it shut. ^ A drying option can be selected or deselected with each press of the button. Quick Guide 4. Start the program ^ Press the "Start/Stop" button. At the end of a program The "Anti-crease / End" indicator will light. ^ Press "Door" and remove the laundry. ^ Press the selection button until the desired indicator illuminates. ^ Press the "On/Off" button to turn off the dryer. Quick Guide Program Normal Extra Dry When to use Available drying options Turbo, Gentle, Anti-crease For laundry to be folded and shelved immediately, e. g. [. . . ] 1/16" - 3/16" (1. 6 - 4. 8 mm) ^ Open the door. ^ A decor panel up to 3/16" thickness can be inserted if the frame sides are pushed forward. ^ Press the frame sides onto the panel und tighten the screws. ^ Push the top of the decor frame onto the frame from the front and fix it with the four screws. ^ Unscrew the 4 screws at the top of the decor frame and pull it forward. [. . . ]