User manual MIELE VACUUM CLEANER S256 BLACK DIAMOND

[. . . ] 39 2 IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic precautions should always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE WARNINGTo reduce the risk of fire, electric shock or injury: To reduce the the risk of electric shock, this appliance has a polarized plug (one blade is wider than the other. ) This plug will only fit in a polarized outlet one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet. A damaged vacuum cleaner can be dangerous. [. . . ] Éteignez toujours l'aspirateur avant d'attacher ou de détacher l'électrobrosse, la turbobrosse ou un accessoire. Ne faites fonctionner l'aspirateur que si le sac à poussière, le réservoir à poussière et les filtres sont bien en place. Pour garantir la sécurité de l'appareil, utilisez uniquement des sacs à poussière, filtres et accessoires originaux de Miele. Les sacs à poussière Miele sont jetables. N'utilisez pas l'aspirateur sans accessoire. Vous pourriez en endommager le pourtour et vous blesser en touchant l'extrémité coupante. 10 CONSIGNES DE SÉCURITÉ Entretien Si le cordon d'alimentation est endommagé, ne le remplacez que par un cordon d'alimentation original Miele disponible chez un détaillant autorisé. Ne laissez pas l'aspirateur branché. Débranchez-le lorsque vous ne l'utilisez pas et avant de procéder à son entretien. Ne placez aucun objet dans aucune des ouvertures. N'utilisez pas l'aspirateur si une des ouvertures est bloquée. Veillez à ce que poussière, peluches, cheveux ou autres n'obstruent pas l'aspirateur, ce qui pourrait réduire le débit d'air. The floor brush is suitable for cleaning carpets, rugs, and hard surfaces. For flooring susceptible to scratches, use one of the special Miele floor brushes (see "Optional accessories"). Adjusting the floor brush Vacuum carpets and rugs with the brush retracted: ^ Press the foot switch marked g. Clean hard floors with the brush protruding: ^ Press the foot switch marked h. Electrobrush / Turbobrush Some models may be supplied with an Electrobrush or a Turbobrush as a standard accessory (see "Optional accessories"). Please refer to the separate operating instructions supplied with these brushes for instructions on use and maintenance. 16 Included accessories Accessory tools for various types of cleaning are supplied with the vacuum cleaner. a Crevice nozzle * b Crevice nozzle extension *, supplied seperately c Dusting brush d Upholstery nozzle * depending on model The tools are located in the accessory compartment, where they can be rearranged after use. Taking the accessories out ^ Press the release button to open the accessory compartment lid. ^ Take out the accessory needed. ^ Close the lid securely. 17 Using the included accessories The different tools can either be fitted to the handpiece or to the suction wand. Crevice nozzle (select models) For cleaning in folds, crevices and corners. Crevice nozzle extension (select models) This accessory can be used to extend the length of the crevice nozzle by pulling out the inner section. ^ Press the locking button to pull the extension piece out or to push it in. Dusting brush For cleaning moldings, ornate or carved articles, etc. The head of the dusting brush can be turned to attain the best cleaning position. 18 Using the included accessories Upholstery nozzle For cleaning upholstery, mattresses, cushions, curtains, covers etc. Blower connection socket The blower connection socket can be used to connect the suction hose to the "blower" outlet of the vacuum cleaner, e. g. for dusting off multi-layered radiators. It can also be used to "blow out" the suction hose if it should ever become blocked. The blower connection socket must be removed if an "ACTIVE air clean filter" or an "ACTIVE HEPA filter" are to be used. [. . . ] On select models the , thermo indicator lights. Check the telescopic wand and the suction hose for blockages. Replace the dustbag or filters if necessary. A heavily soiled exhaust or dust compartment filter can also be the cause of overheating. [. . . ]