User manual MIELE W 4144 WPS

[. . . ] Operating instructions for Washing machine W 4144 WPS To avoid the risk of accidents or damage to the machine it is essential to read these instructions before it is installed and used for the first time. G M. -Nr. 06 732 350 Caring for our environment Disposal of the packing material The transport and protective packing has been selected from materials which are environmentally friendly for disposal and can normally be recycled. Ensure that any plastic wrappings, bags etc. are disposed of safely and kept out of the reach of babies and young children. [. . . ] 200°C) Medium hot iron (max sole plate temp. 150°C) Cool iron (max sole plate temp. Do not steam iron garments carrying this symbol. Do not iron Professional cleaning f p w D Dry clean only. The letters indicate the type of cleaning agent required. Professional Wet Clean only Do not dry clean Bleaching x { Any oxidising bleaching agent can be used Only use an oxygen based bleach or a non-chlorine bleach Do not bleach J h Drying The number of dots indicates the drying temperature q r s Normal temperature Low temperature Do not tumble dry z 26 Changing the programme sequence Cancelling a programme You can cancel a programme at any time after it has started. ^ Press the Start/Stop button. Cancel programme Changing a programme After the start of a programme it is no longer possible to select a different programme. Changing the temperature It is possible to select a different temperature up to 6 minutes after the programme has started. Changing the spin speed It is possible to change the spin speed at any time. Changing extra options It is possible to select or deselect the Short and Water plus Extra options up to 6 minutes after the programme has started. A programme cannot be cancelled or changed if the safety lock has been activated. ^ Press the flashing Start/Stop button again. If you want to remove the laundry: ^ Press the Door button. If you want to select a different programme: ^ Switch the machine off with the I-On/0-Off button. ^ Switch the washing machine back on again. ^ Select and start a new programme. Interrupting a programme ^ Switch the machine off with the I-On/0-Off button. To continue with the same programme: ^ Switch the machine back on with the I-On/0-Off button. 27 Changing the programme sequence Adding or removing laundry after a programme has started ^ Press the Door button to open the drum door. The programme will continue automatically. Please note: Once a programme has started the machine cannot recognise any adjustment to the load. For this reason, if laundry is added or removed after the start of a programme, the machine will always complete the programme cycle assuming a full load which can lead to an increase in the programme duration shown in the display. The door cannot be opened, if: ­ the suds temperature is above 55°C. ­ the water is above a certain level. ­ the programme has reached the Final spin stage. [. . . ] To activate the code Activate ^ Press the Start/Stop button. The display will now request that a code is entered. To enter the code The code is 125 and cannot be altered. O __ __ ^ Turn the programme selector until the first number appears in the display. ^ Confirm your selection of the number by pressing the Start/Stop button. [. . . ]