User manual MIELE W 1065 WASHING MACHINE OPERATING MANUAL

[. . . ] 29 The program was interrupted and a fault message appears. 32 The door will not open when the "Door" button is pressed. 33 Opening the door during a power failure or when the drain is blocked . 52 3 IMPORTANT SAFETY INSTRUCTIONS , WARNING - To reduce the risk of fire, electric shock or injury to persons while using your appliance follow basic safety precautions, including the following: ~ Do not wash articles that have been previously cleaned, washed, soaked or spotted with gasoline, dry-cleaning solvents or other flammable substances. [. . . ] If the washer needs to be descaled, use a descaling agent with corrosion protection. These special descaling agents can be purchased from Miele. Use as directed on the packaging. Cleaning the washer ^ Clean the exterior of the washer with a mild solution of non-abrasive detergent or soap and water. ^ Clean the drum with a stainless steel cleaner specially formulated for use in a washing machine. This type of cleaner is available from Miele. 24 Cleaning and Care Cleaning the detergent drawer Detergent residue should be cleaned out regularly. ^ Pull the detergent drawer out as far as it will go. Press down on the red release lever and pull the drawer out of the machine. ^ Clean the detergent drawer with warm water. Remove the siphon tube from the fabric softener compartment § and rinse under warm water. Clean the pipe on which the siphon tube is attached. Replace the siphon tube. , Do not use chemical solvents, abrasive cleaners, glass or all purpose cleaners. These can damage plastic surfaces and other parts. 25 Cleaning and care Cleaning the water inlet filters The washer has two water inlet filters to protect each inlet valve. Load the laundry Refer to the "Program guide" to determine which program is most suitable for the load being washed. Select wash options (if needed) ^ Turn on the washer using the "On / Off" button. ^ Open the drum door by using the "Door" button. Make sure clothes will not be caught by the door. ^ Press the upper button until the indicator of the desired wash option lights. ^ Press the lower button to select the "Sensitive" wash option. Quick Guide 5. Select the temperature and spin speed 7. Select Delay Start (if needed) ^ Press the "Delay Start" button. Start the program ^ Press the "Start / Stop" button. ^ Press the "TEMP" and "SPIN" buttons until the indicator of the desired value lights. Activate the program lock (if necessary) ^ Hold the "Start / Stop" button until the "Child Lock" indicator lights up. Unload the laundry ^ Open the drum door using the "Door" button. [. . . ] Do not connect the washer to hot water only. ^ Turn on the valve(s) and check for leaks. The water pressure must be within 15 -145 psi (1 -10 bar). If the water pressure is greater that 145 psi (10 bar) a pressure reducer must be installed. [. . . ]