Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual MIELE W TS420. We hope that this MIELE W TS420 user guide will be useful to you.
Lastmanuals help download the user guide MIELE W TS420.
Manual abstract: user guide MIELE W TS420INSTALLATION MANUAL
Detailed instructions for use are in the User's Guide.
[. . . ] Technical Information
Date: June 7, 2004 To: Technical Service Subject: Washer/Dryer Stand W1113, 1119, 1203, 1213, 1215 T1302, 1303, 1322C, 1323C, 1329C, 1403, 1405
Washer
Stand
Washer
Stand
Note: The washer/dryer stand is designed for use with washers and dryers only. Use for any other purpose may result in damage to the machine or personal injury. DO NOT USE OR PLACE A STACKED WASHER AND DRYER ON THIS STAND!
Carry out the following steps prior to installing the stands. [. . . ] carpet) · Remove the washers feet · Using the threaded studs and nuts provided (M10), screw 2 nuts midway onto each threaded stud. · Screw the threaded studs (M 10) into the washer and tighten them see Fig. · Install a washer (10. 2 x 32 x 2) on each threaded stud. · Install a washer (10. 5) on each threaded stud. · Screw a nut (M 10) on each threaded stud and tighten. · Stand the washer upright · Install the washer stand rear panel using the 4 Torx screws provided see Fig. · Place the washer into its final position. · Insert the 2 rubber bushings into the side holes of the washer stand. Install a washer and nut on each and tighten the nut see Fig. 6. Dryer Stand Installation · Drain the unit, before laying it on its side. · Lay the dryer on its right side. Be sure to lay the unit on a flat, soft underlay (i. e. carpet) · Remove the dryers feet · Using the threaded studs and nuts provided (M8), screw 2 nuts midway onto each threaded stud. · Screw the threaded studs (M 8) into the dryer and tighten them see Fig. · Install a washer (8. 5 x 30 x 2) on each threaded stud. · Install a washer (8. 4) on each threaded stud. [. . . ] · Place the drawer on the rails and close the drawer, see Fig. · The drawer locks into position automatically when it is closed. · Open the drawer as far as possible then close it to check that it functions correctly [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE MIELE W TS420
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual MIELE W TS420 will begin.
