User manual MINOLTA DIGITAL REVIO KD-300Z

[. . . ] GB/D Thank you for purchasing this Konica product. Digital Revio KD-300Z is a digital camera equipped with a 3. 34 megapixel CCD for high quality digital photography. Before using the camera, please read this User's Manual carefully and follow its instructions to assure proper use. Wir danken Ihnen für das Vertrauen, das Sie Konica mit dem Kauf dieses Produkts bewiesen haben. [. . . ] When [POWER SAVE] is set to [NO PWR OFF]: With this setting, when the camera is left inactive for more than six minutes, it automatically enters the sleep mode. (In this case, the camera remains in the sleep mode indefinitely, without the power turning off. ) To restore the camera to its normal shooting mode, depress the shutter button halfway, or press one of the other function buttons. 1 MIN 1 MIN 2 MIN 2 MIN 6 MIN 6 MIN Power on and camera in ready but inactive state. Sleep mode; camera operation stops with lens in extended position, but function can be restored by pressing shutter button halfway, or by pressing other function button. 2 MIN <Operation> 1 Press the "%" or "fi" button to select [POWER SAVE]. 3 Using the "%" or "fi" button, select [6 MIN], [2 MIN], [1 MIN] or [NO PWR OFF]. 2 Press the "#" button. ¶ Setting the function to [NO PWR OFF] disables the auto-off function, and the camera will not turn off by itself. 2 MIN 6 MIN NO PWR OFF 2 MIN 4 Press the "@" button (or " " button) to complete the setting. 60 61 Selecting the Automatic Focus Mode This function allows you to set the auto focus format to either [CONTINUOUS] (the automatic focus mechanism operates continuously when the camera is turned on), or [SINGLE] (the auto focus mechanism operates only when the shutter release button is depressed halfway). The relationship between the two modes, power consumption, and the lag time between shutter press and actual image recording is as noted below. Select the mode most appropriate to your needs and style of photography. [CONTINUOUS]: So long as the camera is in recording mode, the auto focus mechanism operates continuously to focus the lens. Since the focus motor is operating continuously, less time is needed to begin image recording when the shutter release button is pressed, but power consumption is greater. [SINGLE] (default): The focus motor only begins operating when the shutter release button is depressed halfway. As a result, somewhat longer time is required to begin image recording after the shutter release button is depressed, but less battery power is consumed. Mode Lock ON/OFF When enabled, this function preserves the camera mode functions set when the camera power is turned OFF. As a result, the same mode settings are restored when the power is next turned ON. When this function is disabled, any mode functions previously set will be returned to their default values when the power is turned OFF and then turned ON again. <Difference in Displays when Mode Lock is ON and OFF> <Setting example> Before power is turned OFF: Flash: No Flash Image Quality: Super Fine White Balance mode: Fluorescent <Operation> 1 Press the "fi" button to select [AUTO FOCUS]. 3 Use the "fi" button to select either [CONTINUOUS] or [SINGLE]. After power is turned ON: 2 Press the "#" button. 4 Press the "@" button (or " " button) to complete the setting. When mode lock is enabled, the function modes set when the camera was turned off are restored when the camera is turned on again. When mode lock is disabled, all function modes are returned to their default values when the power is turned on again. (For default values, see page 71, <Functions and Contents of Default Values>. ) 62 63 Digital Zoom ON/OFF <Operation> 1 Press the "fi" button to select [MODE LOCK]. 3 Press the "fi" button and select either [ON] or [OFF]. This function allows the digital zoom function to be set to ON or OFF. When ON, pressing the "T" button will first cause the lens to zoom to its maximum optical telephoto setting; when pressed again, the digital zoom function will operate to further extend the telephoto range (see page 15). When disabled, only the optical zoom function will operate. <Operation> 2 Press the "#" button. [. . . ] Viewfinder: True image zoom viewfinder Flash: Built-in flash, recycling time about 6 seconds (on full battery charge, at room temperature, based on our testing standards). Flash range about 90 cm - 2. 5 meters (at wide-angle setting). 86 87 Recording Modes: Playback modes: Setup modes: LCD monitor: Flash modes (auto flash, red-eye reduction, fill-in flash, flash-off, red-eye reduction forced flash*); macro recording mode, landscape recording mode; color modes (color, B/W, sepia); white balance (Auto, daylight, tungsten, cloudy, fluorescent, preset); AE modes (programmed, F2. 8; F6. 2); focus (AF/MF); longexposure (OFF/2 sec/4 sec/8 sec); sensitivity (standard/ 2×/4×); metering modes (evaluation; center-weighted; spot). * Settable during long-exposure Multiple image display; protect; erase* (single image); all erase* (erases all images in folder \DCIM); image rotation (right/left 90°); slide show; DPOF setting. * Note that files (and folders) recorded on other manufacturer's cameras and devices cannot be erased by this camera. [. . . ]