User manual MINOLTA LP-670 PLUS BROCHURE

[. . . ] Scan Setup tab This tab appears first after starting the program. The tab contains the conditions applicable to the particular image you are scanning. RX1 User Interface - 2 - KONICA FILM LP-670 PLUS 3 Mode setting Film type The RX1 can acquire images from the following three types of film. Set this to fit the type of film you are scanning. Focusing You can focus the RX1 by the following three methods. [. . . ] Refresh button If the beginning-of-frame position is not accurate during a prescan, the image may have unbalanced colors. Clicking the Refresh button after adjusting the position using the X/Y offset recalculates the colors. X/Y offset This lets you manually adjust the beginning-of-frame position if inaccurate during a prescan. The X offset slide bar appears under the selected frame. Clicking an arrow or anywhere between an arrow and the slider or dragging the slider shifts the frame position Horizontally. (Note that when you rotate an image, it is rotated from the X offset slide bar image position. ) The Y offset slide bar appears to the left of the scroll bar. Operating the Y offset slide bar shifts all the frame positions simultaneously. The offset value or how much they were shifted appears at the right extremity of the screen. Frame count Displays the total number of frames acquired during a prescan. Scroll bar Because the screen displays a maximum of six frames, use the scroll bar to display the remaining frames when the frame count is more than 7. Operate the scroll bar as you do in a Window. RX1 User Interface - 7 - KONICA FILM LP-670 PLUS 8 Right mouse button clicking Selecting a frame and clicking the right mouse button on it display the dropdown menu which offers the following functions. DX code Displays decoded DX code information. Right mouse button clicking Selecting a frame and clicking the right mouse button on it displays a dropdown menu which offers the following functions. · Cropping. Color Adjustment dialog box This lets you use the color adjustment slide bars, buttons, etc. Density adjustment You can adjust density by operating the density slide bar. With the default slider value in mid bar (0), the slider moves over the range of ±50. The current slider value appears to the top right of the bar. Use the slider as you do in a Window. RX1 User Interface - 11 - KONICA FILM LP-670 PLUS 12 Clicking an arrow increases or reduces the value by 1 each time and clicking anywhere between an arrow and the slider by 10 each time. You can drag the slider to a given position, too. Color adjustment There are three slide bars: Y, M, and C. Operate them as you do the density slide bar. Gray balance Mark the check box and move the cursor onto the selected image. Clicking any point in the image changes the color of the particular point into neutral gray and repaints the entire image accordingly. [. . . ] Cancel button Clicking the button closes the Color Adjustment dialog box and undoes the adjustment. Reset button Clicking the button undoes all the adjustments applied in the current Color Adjustment dialog box. RX1 User Interface - 12 - KONICA FILM LP-670 PLUS 13 RX1 User Interface - 13 - KONICA FILM LP-670 PLUS 14 4. Scan tab This lets you manually select the frames you wish to scan. Scan check box There is a check box to the top right of each displayed frame. [. . . ]