User manual MINOLTA MAGICOLOR 2

[. . . ] QMS magicolor 2 Print System Operation ® ® 1800482-001B Trademarks The following are trademarks or registered trademarks of their respective owners. Other product names mentioned in this manual may also be trademarks or registered trademarks of their respective owners. Registered trademarks are registered in the United States Patent and Trademark Office; some trademarks may also be registered in other countries. QMS, Crown, CrownAdmin, CrownCopy, CrownNet, magicolor, the QMS logo, and the Crown seal are registered trademarks of QMS, Inc. , and CrownView, ImageServer, Multi-Res, PS Executive Series, QCOLOR, and QFORM are trademarks of QMS, Inc. [. . . ] Configuration Menu: Administration/Startup Options/Do Sys Start Is Password 0? Identifies whether the Administration menu password is set. 0=Off Configuration Menu: Installation/Use Admin Pwd Identifies whether tray chaining is enabled or disabled. Tray chaining allows the printer to draw media from another input source with either the same or any size and type of media (dependent on the choice selected) automatically when the first input source empties. Configuration Menu: Operator Control/Chain Inputbins Default Chaining Default Paper Tray Number of Paper Trays Left Margin Tells you which input source is the default. Configuration Menu: Operator Control/Inputbin Tells you the number of input sources available on your printer. Identifies the amount (in . 01" increments) the image is adjusted horizontally on the page. Configuration Menu: Administration/Engine/ Image Alignment/Horiz Offset Top Margin Identifies the amount (in . 01" increments) the image is adjusted vertically on the page. Configuration Menu: Administration/Engine/ Image Alignment/Vertical Offset Resolution Identifies the printer resolution. Configuration Menu: Administration/Engine/Def. Resolution CrownView Printer Web Page 6-15 Printer Home Page Communication Settings & Input Buffer Sizes This hotlink displays a screen that shows the communications settings of the printer. Serial IF Identifies the settings for the serial interface. Configuration Menu: Administration/ Communications/Serial Parallel IF Identifies the settings for the parallel interface. Configuration Menu: Administration/ Communications/Parallel IF 1 Identifies the settings for the optional Network1 interface. Configuration Menu: Administration/ Communications/Network1 IF 2 Identifies the settings for the Network2 (CrownNet Ethernet) interface. Configuration Menu: Administration/ Communications/Network2 Shared Spool- Identifies the total amount of spooling space ing Space shared by the interfaces Configuration Menu: No equivalent. Paper Sources This hotlink provides media source information. Upper Identifies the size and type of media currently installed in the upper tray. Configuration Menus: Operator Control/Custom Bin/Upper, Operator Control/Media/For Upper Bin Optional Identifies the size and type of media currently installed in the optional lower input feeder. Configuration Menu: Operator Control/Custom Bin/Optional, Operator Control/Media/For Optional Bin 6-16 QMS magicolor 2 Operation Printer Home Page Options Disk(s) Identifies how many hard disks are attached to the printer and what their addresses are. Configuration Menu: No equivalent Emulations Identifies the installed emulations. Configuration Menu: No equivalent Current Memory Configuration Memory configuration affects the number of jobs that can be accepted by the printer, the number of options available simultaneously, the number of downloadable fonts and emulations that can be stored, and overall printer performance. Host Input Spool Shows the size (in KB) of the Host Input field, also known as K Mem for Spool. This memory client stores incoming data from all the interfaces until the emulation can process the print job. [. . . ] Then call back to request specific documents. You can order up to three documents per call. A-2 QMS magicolor 2 Operation Sources of Support CompuServe Through CompuServe, you ask general (non-technical) questions, share information with other users, and access printing information and programs. When you use CompuServe, type go qmsprint to go directly to the forum where QMS is located. The QMS library section contains application notes, printer drivers, utilities, technical information, and announcement files. Internet The QMS server provides access to technical reports, new product announcements, a trade show schedule, and other general information about QMS. [. . . ]