User manual MINOLTA MAXXUM RZ430SI

[. . . ] If any items are missing, immediately contact your camera dealer. DiMAGE Z5 digital camera Neck strap NS-DG7000 Lens cap LF-243 Shoe cap SC-1000 SD Memory Card AV cable AVC-700 USB cable USB-2 4 AA alkaline batteries DiMAGE Viewer CD-ROM "DiMAGE Viewer Manuals"-CD-ROM DiMAGE Instruction Manual Konica Minolta International Warranty Certificate This product is designed to work with accessories manufactured and distributed by Konica Minolta. Using accessories or equipment not endorsed by Konica Minolta may result in unsatisfactory performance or damage to the product and its accessories. For proper and safe use Read and understand all warnings and cautions before using this product. WARNING Using batteries improperly can cause them to leak harmful solutions, overheat, or explode which may damage property or cause personal injury. · Only use the batteries specified in this instruction manual. [. . . ] The metering mode is set in section 2 of the P, A, S, and M menus (p. Multi-segment metering: uses 256 segments to measure luminance and color. This data is combined with distance information to calculate the camera exposure. This advanced metering system will give accurate worry-free exposures in almost all situations. Flash compensation Flash compensation increases or decreases the flash exposure of the built-in flash in reference to the ambient exposure by as much as 2 Ev. Select the flash compensation option section 2 of the P, A, S, and M menus (p. Use the up/down keys to adjust the degree of compensation. Press the central controller button to set this value. If any value other than 0. 0 is set, an indicator will be displayed on the monitor as a warning. Focus mode Full-time AF Flash mode Flash comp. Metering mode Center weighted: a traditional metering method in film cameras. The system measures light values over the entire image area with emphasis given the central region. ­2 ~ +2 +0. 3 Spot metering: uses a small area within the image to calculate the exposure. A small circle appears in the middle of the live image indicating the measuring area. This can be set in section 3 of the P, A, S, and M menus (p. Any changes made are applied to the live image. If any level except normal is selected, an indicator appears on the monitor as a warning. Flash range and camera sensitivity The flash range is measured from the front of the lens. Because of the optical system, the flash range is not the same at the lens' wide-angle position as it is at the telephoto position. ISO setting AUTO 50 100 200 320 64 Flash range (wide angle) 0. 2 - 3. 6m (0. 7 - 13. 1ft. ) 0. 2 - 2. 0m (0. 7 - 6. 6ft. ) 0. 28 - 2. 9m (0. 9 - 9. 5ft. ) 0. 4 - 4. 0m (1. 3 - 13. 1ft. ) 0. 50 - 5. 1m (1. 65 - 16. 7ft. ) Flash range (telephoto) 1. 2 - 2. 2m (3. 9 - 7. 2ft. ) 1. 2 - 1. 3m (3. 9 - 4. 3ft. ) 1. 2 - 1. 8m (3. 9 - 5. 9ft. ) 1. 2 - 2. 5m (3. 9 - 8. 2ft. ) 1. 2 - 3. 2m (3. 9 - 10. 5ft. ) Contrast: low Contrast: normal Contrast: high Advanced recording 65 Sharpness Sharpness accents or softens details in an image in three levels: hard (+), normal, and soft (­). This can be set in section 3 of the P, A, S, and M menus (p. Any changes made are applied to the live image, but may be difficult to see. However, when viewed with a computer, the changes will be evident. If any level except normal is selected, an indicator appears on the monitor as a warning. Custom Key function Sensitivity Color mode Sharpness Contrast Key func. Auto NaturalColor Normal Normal Flash mode The function assigned to the flash mode button can be selected among the flash mode, drive mode, white balance, focus mode, color mode, and camera sensitivity. This can be set in section 3 of the P, A, S, and M menus (p. The flash mode can also be changed in section 2 of the P, A, S, and M menus. Sensitivity Color mode Sharpness Contrast Key func. Auto NaturalColor Normal Normal Flash mode When the key-function option is selected and entered, a selection screen appears. [. . . ] To install QuickTime, follow the instructions in the installer. QuickTime is not supplied with the camera in all sales regions. Users can download the latest version of QuickTime free of charge from the Apple Computer web site at http://www. apple. com. This mark on your camera certifies that this camera meets the requirements of the EU (European Union) concerning interference causing equipment regulations. CE stands for Conformité Européenne (European Conformity). [. . . ]