User manual MINOLTA REGIUS 110 BROCHURE

[. . . ] The included medium-format film holder uses antinewton glass and includes masks for 6x4. 5, 6x6, 6x7, 6x9. · 12-bit AD converter, so fine detail is captured with a dynamic range. This manual has been designed to help you understand the operation of your scanner. To realize all the benefits of your scanner, please read this manual and the accompanying software manual thoroughly. [. . . ] Press the eject button on the front of the scanner. · The holder will automatically eject partway, then stop. 2. Remove the holder. · Wait for the Indicator lamp to turn off before removing the holder. · The holder should pull out easily. 23 APS ADAPTER AD-100 (SOLD SEPARATELY) · The APS Adapter AD-100 (optional accessory) is required to scan APS film in the cassette with the Dimâge Scan Multi. Only processed film with the VEI set to the APS Adapter AD-100. can be inserted into APS ADAPTER ­ NAMES OF PARTS Film-chamber release Film-chamber door Scanner contacts* * Do not touch 24 LOADING THE CASSETTE 1. Slide the film-chamber release as shown. · The film chamber door will open. 2. Insert the film cassette into the film chamber with the VEI on top. · Only load cassettes displaying the mark. 3. Close the film-chamber door. · The film-chamber release will return to its start position when the door is closed properly. 25 INSERTING THE ADAPTER 1. Press the power switch to turn the scanner on. Turn on your computer, then launch the Dimâge Scan Multi software. · The green indicator lamp will blink slowly while the scanner is setting up. 2. Pull the accessory panel on the scanner straight out, then open it all the way pushing it until it clicks. · Do not force the accessory panel. · Do not open the accessory panel during the set-up process. Wait until set-up is complete and the indicator lamp is off. 3. After the optics have been moved, a message will appear asking you to turn the scanner off. Click on OK. · The utility software will quit. 4. Turn off the scanner and other SCSI devices. Using a flat-head screwdriver, push down and turn the locking pin clockwise until it locks down. · Once the optics have been moved to the locking position through the software, the scanner must perform the set-up operation to return to normal. The scanner automatically performs set-up when it is first turned on. Set-up can also be initiated by pressing the following keys simultaneously while the software is active: Windows95/NT: Control + Shift + i Macintosh: Command + Shift + i 30 TROUBLESHOOTING Symptom The computer will not start after connecting the scanner. Cause/Action Check that all the SCSI cables are secure. Check that two SCSI devices are not sharing the same address. Reference Page 8 The computer does not recognize the scanner. Was the scanner turned on before the computer was turned on?Check that all the SCSI cables are secure. Windows 95/NT: Check that the SCSI device driver been installed correctly. Select Start ` Settings ` Control Panel. · The Control Panel window will appear. [. . . ] Drag the DS Multi Profiles into the ColorSyncTM System Profile folder now in the Preferences folder. Drag the ColorSync filter to Adobe Photoshop's Filters folder located inside the Plugins folder. 41 LAUNCHING THE SOFTWARE ­ WINDOWS The utility software is a stand alone application used to control the scanner. The TWAIN driver lets you control the software through another application, such as your image editing software. LAUNCHING THE TWAIN DRIVER This uses Adobe Photoshop 4. 0. 1 as the example. Commands may vary among applications. 1. [. . . ]