User manual MINOLTA REVIO KD-510Z

[. . . ] Digital Still Camera User's Guide Thank you for your purchase. For the correct usage of this product, please read this User's Manual and warranty card carefully and keep them in a safe place for future reference. Before accepting the warranty card, please make sure that the date of purchase and the dealer's details have been completed. Getting Started Please be sure to read this manual before use. · Test shooting Be sure to take some test shots before taking important pictures (such as business or weddings) to make sure that the camera is working properly. · Results are not guaranteed In the unlikely event that a problem arises in shooting or reproducing pictures due to the camera or memory card used, please understand that no compensation can be made. · Be aware of Copyright Any pictures that you take of existing images may be used for personal use only. Copyright law prohibits the use of pictures without the permission of the rightful owner. [. . . ] Select "ON" with button. 3 3. Select flash mode with or button and press or button to set up shutter speed. Press MENU/SET button to finish set up and go back to the screen in 1. · Change the slow shutter settings to "OFF" to go back to the normal shutter speed (default setting). When the slow speed setting is "OFF" and if flash mode is AUTO or (Fill-In), the shutter speed will be 1/60 seconds. When the slow speed setting is "OFF" and if flash mode is (OFF) or (Slow Sync), shutter speed will be 1/8 seconds. 61 Using the REC Menu (Cont'd) Taking photographs in manual exposure mode - Shutter speed and focus value can be set according to conditions and purpose. - Shutter speed can be set between 15 and 1/1000 seconds. Focus value differs with zoom magnifications and can be switched to 2 levels according to magnification. 1 1. Select "MAN EXPOSURE ON" and press button. 2 2. It will turn to through image and M mark, focus value and shutter speed will be displayed in blue. Set up focus value with button and shutter speed with or button. · Please use a tripod to prevent movement during slow shutter speed exposure. 62 Using the REC Menu (Cont'd) - When setting up manual exposure mode, the function of , and button can be changed every time button is pressed. Manual exposure can be set up when focus value and shutter speed is displayed in blue. Press button to switch over the function of , and button. Each mode of "flash (p. 38)", "shooting (p. 39)" and "white balance (p. 107)" can be set up. - M mark, focus value and shutter speed will be displayed on the LCD monitor all the time when setting up manual exposure mode. Exposure value (exposure difference to brightness) will be displayed by half depressing shutter button. (Displays in 0. 3EV steps within ±2. 0. ) Even if brightness around changes, the exposure value can be confirmed whenever the shutter button is half depressed. - In manual exposure mode, if shutter mode is set slower than 1/2 second, it will take longer for processing due to the noise reduction function. - Some of the functions will be restricted on manual exposure mode. · · · · "Exposure correction" mode (p. 50) in the REC menu cannot be set. ISO sensitivity (p. 64) will be fixed to "ISO50" when it is set to "AUTO". Flash AUTO mode and portrait night view mode cannot be selected. When flash emits light on red eye reduction mode, set up shutter speed will be used. - When taking a photograph using a flash in manual exposure mode, the intensity may not be appropriate according to conditions. In such a case, please use flash intensity mode in image quality setting (p. 64). [. . . ] (Additional charge is required at the time of replacement. ) 127 Warranty and After-sales Service For repair, handling and care, first consult the dealer from whom you purchased the camera. Warranty (separately attached) Before accepting the warranty card, please make sure that the date of purchase and dealer of purchase and the dealer's details have been completed. After reading the warranty, keep it in a safe place. Warranty period (main unit): one year from the date of purchase When requesting service If symptoms persist after having checked the table on pages 123 and 124, Troubleshooting, disconnect the power supply and contact the dealer from whom you purchased the camera. Note: Transportation cost for taking/bringing back the product to/from repair, shipping costs or carrying charges are at the customer's expense. [. . . ]