User manual MINOLTA SR-T 200

[. . . ] The included medium-format film holder uses antinewton glass and includes masks for 6x4. 5, 6x6, 6x7, 6x9. · 12-bit AD converter, so fine detail is captured with a dynamic range. This manual has been designed to help you understand the operation of your scanner. To realize all the benefits of your scanner, please read this manual and the accompanying software manual thoroughly. [. . . ] Align the frames within the scanning windows. 16 4. Press the cover firmly closed until it clicks. 17 LOADING THE MEDIUM FORMAT HOLDER MH-M1 USING THE MEDIUM FORMAT HOLDER MH-M1 Use the MH-M1 for 120/220 film frames in 6x4. 5, 6x6, 6x7, and 6x9 formats. The MH-M1 should also be used for sleeved APS film, 16mm film, and TEM* film. Use the appropriate film mask for each film format. The glass in the Medium Format Film Holder MH-M1 has been treated to prevent the appearance of Newton's rings (coloured rings) when scanning. · Handle the Medium Format Film Holder MH-M1 with care. Protect the glass from impact, shock, and scratches. · Touching the glass in the film holder may cause damage to the antinewton treatment. · Blow away any dust from the film holder before inserting the film. If the film holder is dirty, first blow away any dust or debris, then moisten a lens cleaning tissue with lens cleaning fluid and gently wipe the surface. * Transmission Electron Microscope MEDIUM FORMAT AND TEM FILM 1. Turn on your computer, then launch the Dimâge Scan Multi II software. · The green indicator lamp will blink slowly while the scanner is setting up. 2. Insert the holder into the scanner in the direction indicated by the white arrow on top of the holder. · Do not insert the holder at an angle. 3. Gently push the holder into the scanner until the raised insertion mark is aligned with the film-slot door. · The film holder will be automatically guided in past the mark. · If the holder is not loaded correctly, then eject and reinsert it. EJECTING 1. Press the eject button on the front of the scanner. · The holder will automatically eject partway, then stop. 2. Remove the holder. · Wait for the Indicator lamp to turn off before removing the holder. · The holder should pull out easily. 23 APS ADAPTER AD-100 (SOLD SEPARATELY) · The APS Adapter AD-100 (optional accessory) is required to scan APS film in the cassette with the Dimâge Scan Multi II. Only processed film with the VEI set to the APS Adapter AD-100. can be inserted into APS ADAPTER ­ NAMES OF PARTS Film-chamber release Film-chamber door Scanner contacts* * Do not touch 24 LOADING THE CASSETTE 1. Slide the film-chamber release as shown. · The film chamber door will open. 2. Insert the film cassette into the film chamber with the VEI on top. · Only load cassettes displaying the mark. 3. Close the film-chamber door. · The film-chamber release will return to its start position when the door is closed properly. 25 INSERTING THE ADAPTER 1. Press the power switch to turn the scanner on. [. . . ] Macintosh: Press Command, Shift, and i keys simultaneously. Reinitializing while using the APS adapter: 1. · Press the initialization key combination. Initialization (set-up) will resume. 32 INDICATOR LAMP The indicator lamp on the front of the scanner reveals the status of the scanner. Indicator Lamp Off Scanner Status Set up is complete and there is no holder inserted in the scanner. Green ­ blinking slowly Scanner is busy: · setting up (initializing). [. . . ]