Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual MINOURA BIKE TOWER. We hope that this MINOURA BIKE TOWER user guide will be useful to you.
Lastmanuals help download the user guide MINOURA BIKE TOWER.
You may also download the following manuals related to this product:
MINOURA BIKE TOWER (485 ko)
Manual abstract: user guide MINOURA BIKE TOWER
Detailed instructions for use are in the User's Guide.
[. . . ] Most parts are made of light alloy so the completed weight of the Bike Tower is only 3 kgs, therefore your can move it anywhere you want easily and its simple design can fit everywhere.
IMPORTANT NOTES
· Please read this instructions manual carefully before use. · Bike Tower is the display stand for ordinary 2-wheel bicycles only. Do NOT use it for any other purpose, for example, for displaying heaviy electric bikes or tandem bikes. [. . . ] C) Screw the supplied M6x15 bolt in the lower hole, but you don't need to tighten it so firmly at this time. C)
4
The distance between the plastic frame hooks can be adjusted to fit different sized bicycles. To do so, loosen the rear nut and adjust the position of the hook. After adjusted to the required position, retighten the nut firmly. D) Now, disassemble the supplied stainless band device by removing the bolt. Wind the stainless band around the pole, and insert the end of the band into the gap between another end and the rectangle nut. Holding it in place, put the plastic bracket and assembled cradle together, then tighten them down with the bolt you removed earlier. E) The stainless band must ONLY be used on the upper side of the cradle. DO NOT use it on the bottom portion of the cradle. Tighten the bolt on the stainless band firmly. Failure to do so may cause the bicycle to slip down the pole.
(Fig. E)
stainless band
!
!
just putting onto the pole (Fig. F)
1
6
Set the Bike Tower between the ceiling and the floor. First, put the upper rubber cup against the ceiling and push the pole up to contract and shorten the inside spring. [. . . ] At this time, do NOT remove the nut from the band. If you had removed the nut, make sure the nut direction that the longer side must be vertical. If you see there is some space between the nut and stainless band, the direction is wrong.
FOR MORE INFORMATION
For parts or service outside of Japan or North America, please consult your local shop or our international distributor list (found on our web site) for a distributor in your country. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE MINOURA BIKE TOWER
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual MINOURA BIKE TOWER will begin.
MINOURA BIKE TOWER (485 ko)
