Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual MINOURA HYPERBRAIN. We hope that this MINOURA HYPERBRAIN user guide will be useful to you.
Lastmanuals help download the user guide MINOURA HYPERBRAIN.
Detailed instructions for use are in the User's Guide.
[. . . ] Then slide the Main Unit into the Base until it clicks into place. To use the plastic Handlebar Mount, remove the bolt and the vinyl cap then coil the band around your handlebar or somewhere with the same diameter. Put the supplied rubber pad between the band and the handlebar if you need. Tighten the bolt firmly and simply slide the Main Unit into the Base until click. [. . . ] Setting Speed Scale Press AC button on the backside of the Main Unit to clear all data. Then "mile/h" alone will be displayed, "km/h" and "mile/h" are alternately displayed each time when the Start/Stop button is pressed. Press the center Set button to set the speed scale. Setting the wheel circumference The figures "2155" (standard wheel circumference for 27") will flicker. This is just a guideline so you have to adjust this number to the exact size of your rear wheel. Measure the exact circumference of your wheel and input this number. If you are going to use HyperBrain on HyperMag or HyperRim, set this number as "117" (the circumference of the drive roller of your Hyper series resistance unit). To revise "2155" to any number, press the Mode button to decrease the number one by one. When the button is held down, it will rapidly decrease. To increase the number, press Start/Stop button. When the desire figure appears, press the Set button. Current Speed and Elapsed Time will be displayed, then the figure you selected will be set. Setting the 24-hour clock time Set the main unit in the clock mode by pressing the Mode button for over 2 seconds. Press the Set button to adjust the time. The time stored appears, and the figures for minute flicker. Press the Start/Stop button to advance the figures one by one. When the button is held down, it will rapidly increase. Set a time one or two minutes ahead of the current time. Adjust it by using the Start/Stop button. Press the Set button and the undisplayed second will return to zero. How to replace the battery If the display becomes invisible from the front, it is time for replacing battery. Prepare a new battery (CR2032) in advance, before taking out the old battery. [. . . ] You don't need to press the Start/Stop button each time when the Auto function is switched on. To switch on/off the Auto function, set the main unit in the (T), (D), or (A) mode. Press the Set button and the Auto function will be switched on/off each time the button is pressed. When the Auto function is switched on, the "AT" symbol appears. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE MINOURA HYPERBRAIN
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual MINOURA HYPERBRAIN will begin.
