User manual MINOURA ICE

[. . . ] (version 1. 1. 2) INSTRUCTION MANUAL -1- Introduction Thank you for selecting the Minoura ICE (Interactive Cycling Experience) system. ICE is an upgrade kit used in conjunction with your Minoura Magturbo trainer. Everything you need to install ICE onto your existing Minoura trainer is included in this package. Once installed, you will be able to enjoy training in a virtual world when connected to your PC (IBM compatible with Windows 95 or 98). [. . . ] Choose Start | Run Configured Program, and type "a:\setup " to start the update program. (If your floppy disk drive is not the drive:A, change to the certain number. ) Then click OK. 2. Readme Information: Read "Information" carefully and click Next. Choose Destination Location: Next, choose the destination where the update program will be installed. Be sure you choose the exact same directory where UltraCoach VR is already installed. If a different directory is appeared in Destination Directory column, click Browse to select the exact directory. After choosing directory, click Next. 4. Start Copying Files: If your settings are everything OK, click Next to start copying files. If there are some mistakes, click Back to edit settings. 5. Setup Complete: After all files are copied into your PC, click Finish to complete the installation processes. About 10-day Trial Period The first time you run the updated UltraCoachVR software, you will be notified that UltraCoachVR is setting up a 10-day trial period. You can use all functions of this software during this trial period, , but your will not be able to use any courses and any functions after this period is finished. The only way to unlock this period is being authorized yourself by UltraCoach and get your own Site Key. The date you first installed the software is registered safely in your computer and cannot be changed. See the example of the Warranty Registration Card on the next page. complete the form, and follow the directions on the card to send it in. MAKE SURE YOU PROVIDE YOUR SITE CODE AND THE SERIAL NUMBER FROM YOU UPDATE DISKETTE. - 20 - Site Code is a kind of key which will not be allowed to be used by anyone except you. You will find it when you click Yes on the first Set Program Authorization dialog box, or in the Authorization | Set Authorization. . . Copy down your Site Code and inform it with all required information about you to UltraCoach. UltraCoach will provide you the Site Key within 2 business days via fax or Email. After you get the Site Key, enter it into the Site Key column and click Apply Site Key button. <Form Example> (Fig. Q) - 21 - About Online Manual You can use the online manual or help file for both UltraCoachVR and UltraCoachHRM software. [. . . ] If you want to save the result, click Yes button or press Y key. - 32 - Once you saved your performance, you can set the data as your future competitor from next session. After that you will ne asked if you want to quit the software or not. If you want to completely quit the software, click Yes button or press Y key. [. . . ]