User manual MINOURA PAIR STAND

[. . . ] Bicycle display stand "PAIR STAND" instruction manual Please read this instuctions carefully before use. Thank you for purchasing Minoura PAIR STAND bike display stand. This stand can hold up to two bikes horizontally in a space as same as for only one bike. IMPORTANT NOTES ! This stand is designed for standard two wheel bicycles. Do not use this stand for electric bikes or tandems. [. . . ] Lower Pillar Rear Leg Bottom Plate Reinforcement Arm Front Leg (Fig. B) (Fig. C) 4 Place the Connecting Plates at the top of the Lower Pillar. Connect the Upper Pillar to the Lower Pillar then tighten the M6x14 bolts firmly. Upper Pillar Stainless Band Plastic Bracket (Fig. H) 8 Connecting Plate Lower Pillar (Fig. Place the Angle Adjust Plate onto the Lower Support, then put the Alloy Stay on it. Fix three parts with the supplied M6x20 bolt in the upper hole. E) Screw the supplied M6x15 bolt in the lower hole, but you don't need to tighten it so firmly at this time. The cradle is adjustable in degrees. If you want to move the cradle, loosend the lower bolt on the angle adjust plate, change the angle until the displayed bike will be horizontally as much as possible then (Fig. I) To put a bike on PAIR STAND, lift the bike and gently place the top tube into the frame hooks. If the bike does not have a standard frame design, it should be supported by the top tube and rear seatstay configuration. E) 6 The distance between the plastic frame hooks can be adjusted to fit different sized bikes. To do so, loosen the rear nut and adjust the position of the hook. After adjusted to the required position firmly re-tighten the nut. F) WHY MY NUT IS MISALIGNED? (fig. F) ! The stainless band must ONLY be used on the upper side of the cradle. [. . . ] H) Wrap the stainless band around the pillar, in-sert the end of the band between another end and the rectangle nut. Put the plastic bracket onto the band, attach the hook or support arm, then tighten the bolt. (for North American residents only) 1996 East Avenue, Hayward, CA 94541-5454 U. S. A. Fax: 1-510-538-5899 / Email: MinouraUSA@ATTglobal. net MADE IN JAPAN Copyright 2002 Minoura Co. , Ltd. [. . . ]