User manual MINOX DC-6311

[. . . ] 2-E Digital Camera >> FCC STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for Class B digital devices, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. [. . . ] The setting range of the exposure compensation is as follows. -2. 0, -1. 7, -1. 3, -1. 0, -0. 7, -0. 3, 0, +0. 3, +0. 7, +1. 0, +1. 3, +1. 7, +2. 0 The larger the value, the brighter the image. The smaller the value, the darker the image. The set value is displayed on the screen. E-41 42-E Digital Camera >> Effective Subjects and Set Values * * * * + (positive) compensation Printed matter comprising black text on whitish paper Backlighting Bright scenes or strong reflected light such as ski slopes When the sky accounts for a large area on the screen - (negative) compensation People illuminated by a spotlight, in particular, against dark background Printed matter comprising white text on blackish paper Weak reflecting bodies such as evergreen trees or darkish leaves Backlight correction (+1. 3, fixed) When the background is bright and the subject is dark. When subjects (people) have a light source such as the sun to their backs. * * * * * The backlight correction setting can be set in the [ [ ] and [ ] modes. ], [ P ], [ Tv ], [ Av], [ P ] Program (Automatic Exposure) Photography Mode The Vivicam 4000 automatically sets the shutter speed and the aperture to suit the brightness of the subject. This allows you to capture image with ease just like when the [ ] mode is selected. 1. Compose the image, press the shutter button down halfway, then press it down fully. Exposure compensation can be set. User's Manual >> [ Tv ] Shutter Speed Priority Photography Mode In this mode, images are captured with the priority given to shutter speed. The aperture is automatically set according to the shutter speed. If you set a fast shutter speed, you can capture images of moving subjects that look as if they are still. If you set a slow shutter speed, you can capture images that give the impression that the subject is in motion. Set the mode dial to [ Tv ] and press the button. 2. Set the shutter speed with the selection wheel. Turn the selection wheel in the direction (faster shutter speeds) Turn the selection wheel in the direction (slower shutter speeds) The shutter-speed range is as follows. 1/1500, 1/1250, 1/1000, 1/800, 1/650, 1/500, 1/400, 1/320, 1/250, 1/200, 1/160, 1/125, 1/100, 1/80, 1/64, 1/50, 1/40, 1/32, 1/25, 1/20, 1/16, 1/13, 1/10, 0. 13s, 0. 16s, 0. 20s, 0. 25s, 0. 3s, 0. 4s, 0. 5s, 0. 6s, 0. 8s, 1s, 1. 3s, 1. 6s, 2s, 2. 5s, 3. 2. s, 4s, 5s, 6. 4s, 8s E-43 44-E Digital Camera >> The shutter speed and corresponding aperture value are displayed on the screen. If an appropriate combination cannot be set, the aperture value is displayed in red, but images can be captured regardless. Compose the image, press the shutter button down halfway, then press it down fully. Setting the shutter speed slower than 0. 5 second will result in long exposure photography and the [ ] will be displayed on the screen. ] and [ ] are set, the fastest In the flash photography mode, when[ shutter speed is 1/250 second. In the burst capture mode [Continuous] and [Auto Exp. ], the shutter speed cannot be set slower than 0. 5 second. User's Manual >> [ Av ] Aperture Priority Mode In this mode, images are captured with the priority given to aperture. The shutter speed is automatically set according to the aperture. The aperture will affect the depth-of-field of the camera. If you set a small aperture (higher F value), you can capture portrait images with an out-of-focus background. Alternatively, if you set a large aperture (lower F value), both close objects and distant objects will be in focus, for example when capturing landscape images. [. . . ] Follow the on-screen instructions to complete the installation. For Mac users: 1. Insert the CD-ROM that came with the camera into the CD-ROM drive. Select and double-click "Acrobat Reader". Select and double-click the language that you want. [. . . ]