User manual MINOX DC 7011

[. . . ] FCC STATEMENT (For customers in USA) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for Class B digital devices, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. [. . . ] You cannot enter the Playback mode from the Setup mode. EN-33 Magnifying Images While reviewing your images, you may enlarge a selected portion of an image. This magnification allows you to view fine details. The zoom factor displayed on the screen shows the current magnification ratio. The last recorded image appears on the LCD monitor screen. To view the previous image, press the four-way controller ( ). To view the next image, press the four-way controller ( ). Adjust the zoom ratio by using the / button. To enlarge the selected image, press the button. To return to the normal image, press the button. The magnification factor is displayed on the LCD monitor screen. To view different portions of the images, press the four-way controller ( adjust the display area. 1. 5X ) to The magnification factors range from 1. 5X to 4X (within 6 stages: 1. 5X, 2. 0X, 2. 5X, 3. 0X, 3. 5X and 4. 0X). EN-34 Thumbnail Display This function allows you to view 9 thumbnail images on the LCD monitor screen simultaneously so you may search for a particular image. The last recorded image appears on the LCD monitor screen. Nine thumbnail images are displayed 4 5 6 simultaneously. For recorded movie clips, the movie mode icon will be displayed. 9 7 8 For protected images/movie clips, mark will be displayed. (Refer to the section in this manual titled "Protecting Images/Movie Clips" for further details. ) 3. Use the four-way controller ( ) to move the cursor to select the image to be displayed at regular size. Press the or / button to display the selected image on full screen. EN-35 Slideshow Display The slideshow function enables you to play your images back automatically in sequential order. This is very useful and entertaining feature for reviewing recorded images and for presentations. The last recorded image appears on the LCD monitor screen. Press the MENU button to access the Playback menu. Then use the four-way controller ( ) to select [Slide Show] and press the button. [. . . ] This starts printing and displays the message "Transferring" on the LCD monitor screen. The message will disappear after the printing is finished. Then the screen returns to [Printing Mode Select]. To cancel printing: Pressing the button during print data transfer displays the screen for selecting whether to [Continue] or [Cancel] printing. Print In Info Quantity Date File Name 10 With Wit ith With ith Wit 3 Cancel : Select : 100-0008 4 Select : Cancel : Print : Set : Print Paper Pape per Si Size Borde less Bo derles Borderless Standard Standar Standard Standar Standard Standard 5 Cancel : Total 3 otal OK : Tr ansfer ring 1/3 6 Cancel : Print Continue Cancel OK : EN-64 In [Print All] Mode: Lets you print all images with PictBridge. Step Figure Printing Mode Select Print Procedure If you wish to print all the images stored in the camera, you may choose [Print All] in [Printing Mode Select]. 1 2 Print All Print With DPOF ith DPO OK : To set Print Settings, follow steps 2 to 6 in [Print] Mode. In [Print With DPOF] Mode: This function only lets you print the specified image based on the previous DPOF settings. [. . . ]