User manual MINOX DC 8011

[. . . ] FCC STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for Class B digital devices, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. [. . . ] Select [Cancel Protect] with the / buttons, and press the SET button. The removal of image protection is executed and the camera returns to the playback mode. MENU:Exit Play SET:Enter MENU:Exit SET:Enter Protecting multiple images simultaneously 1. Select [Protect] with the / buttons from the playback menu, and press the SET button. Select [Select] with the / buttons, and press the SET button. The images are displayed in the thumbnail display. Select the image you want to protect with the / / / buttons, and press the DISP button. The protect icon [ ] is displayed with protected images. Selecting a protected image and pressing the DISP button again will cancel the protection. This procedure is repeated to select multiple images. Protection and cancellation of the protectionare are executed and the camera returns to playback mode. Formatting an SD/SDHC memory card overrides protection, and erases all images regardless of their protected status. EN-23 DPOF Settings DPOF is the abbreviation for Digital Print Order Format, which allows you to embed printing information on your memory card. You can select the images to be printed and how many prints to make with the DPOF menu in the camera and insert the memory card to the card compatible printer. When the printer starts printing, it will read the embedded information on the memory card and print the specified images. Select the image that you want to set DPOF with the / buttons. Select [DPOF] with the / buttons, and press the SET button. Select [Single] or [All] with the / buttons, and Play press the SET button. [Single]: Sets DPOF for each individual image. [All]: Sets DPOF for all images at once. Select [Print Num] with the / buttons, and press the SET button. MENU:Exit SET:Enter This displays the number of prints setting screen. Set the number of prints with the / buttons, and Play press the SET button. You can set up to 9 prints for each image. Select [Date Print] with the / buttons, and press the SET button. [. . . ] [COMPLETE] will be displayed temporarily, reminding you that the printing procedure is PRINTING finished. If an error is detected during the connection (i. e. the printer hardware problem) between camera and printer, [PRINT ERROR] will be displayed. If an error is detected during the communication (i. e. [. . . ]