User manual MINOX DSC

[. . . ] Instruction manual DSC Digital Spy Camera Content Introduction . 33 Increasing the camera memory capacity with a microSD card . 34 Connecting the flash module (DSC Flash) to the camera (DSC) . 41 Transferring images to your computer . [. . . ] When switched on the flash is controlled automatically and only operates when there is insufficient light. If the flash is not connected the LED flash in the camera is used. When the flash module is connected, this flash is used instead of the internal LED flash. After switching on the flash function the green lamp (LED) on the flash module lights on to indicate that the flash is ready for operation. The time it takes to signal that the flash is ready can vary, depending on the charge status of the built-in battery. Press the Up button again to deactivate the flash function, the LED display lights up blue again. Taking videos Framing the subject and shooting the video Set the mode dial to the desired Video mode. With connected and switched on flash the -signal appears on the monitor. Frame the scene you want to shoot through the viewfinder of the DSC or in the monitor of the connected and switched-on flash module. Press the shutter release to start shooting the video. The LED display lights up red during the shooting. To stop shooting press the shutter release again. 39 Playback mode Viewing details (only photos) The zoom function allows you to view details of your images. When you are viewPlayback Zoom ing an image press the 4 Thumbnails shutter release to en9 Thumbnails ter the Playback menu. Slide Show Select Zoom and press the shutter release to confirm this selection. Pressing the Up or Down button enables you to zoom in or zoom out. Press the shutter release again to view the individual image details in square sections. With the Up or Down button you can select and view the individual details of the image. Press the shutter release a third time to exit the Zoom mode. Viewing images or videos on the monitor The images or video clips stored on your camera can be viewed on the monitor integrated in the flash module. To do this, connect the DSC flash module to your DSC as described above and switch the monitor on. Activate the Playback mode by turning the mode dial to the corresponding position. The monitor of the connected flash module now displays the -symbol. Press the Up or Down button to page through your saved images or video clips. Press the shutter release to start a selected video clip. [. . . ] Wipe the surface gently with the special micro-fiber cloth. If there are any marks on the lens, put a drop of the liquid lens cleaner onto the micro-fiber cloth and gently wipe the lens surface. Never scratch any part of the camera or flash module with hard objects. Never use volatile substances such as solvents, benzene or insecticides, as these may react with the camera body and cause deformation or damage to the coating. How to keep the DSC and the external DSC flash If you are not using your MINOX DSC for a longer period of time, it is best to store it and the flash module in a dry place. When flying We do not recommend storing the camera in your suitcase or baggage. [. . . ]